The Influence of ZnO Oxide Layer on the Physicochemical Behavior of Ti6Al4V Titanium Alloy

The Influence of ZnO Oxide Layer on the Physicochemical Behavior of Ti6Al4V Titanium Alloy

Titanium and its alloys are characterized by high biocompatibility and good corrosion resistance as a result of the ability to form a TiO<sub>2</sub> oxide layer. However, based on literature data it can be concluded that titanium degradation products, in the form of titanium particles,...

Full description

Bibliographic Details
Main Authors:	Anna Woźniak, Witold Walke, Agata Jakóbik-Kolon, Bogusław Ziębowicz, Zbigniew Brytan, Marcin Adamiak
Format:	Article
Language:	English
Published:	MDPI AG 2021-01-01
Series:	Materials
Subjects:	Ti6Al4V titanium alloy corrosion test EIS test contact angle inflammatory ALD (atomic layer deposition)
Online Access:	https://www.mdpi.com/1996-1944/14/1/230

Similar Items

Selected Physicochemical Properties of Diamond Like Carbon (DLC) Coating on Ti-13Nb-13Zr Alloy Used for Blood Contacting Implants
by: Magdalena Antonowicz, et al.
Published: (2020-11-01)

The Influence of Hybrid Surface Modification on the Selected Properties of CP Titanium Grade II Manufactured by Selective Laser Melting
by: Anna Woźniak, et al.
Published: (2020-06-01)

Influence of Surface Modification on Properties of Stainless Steel Used for Implants / Wpływ Modyfikacji Powierzchni Na Właściwości Stali Nierdzewnej Stosowanej Na Implanty
by: Basiaga M., et al.
Published: (2015-12-01)

Atomic Layer Deposition of ZrO2 on Titanium Inhibits Bacterial Adhesion and Enhances Osteoblast Viability
by: Jo Y, et al.
Published: (2021-02-01)

Physiochemical properties of TiO2 nanoparticle thin films deposited on stainless steel
by: M. Basiaga, et al.
Published: (2017-01-01)

Corrosion resistance improvement of titanium base alloys
by: Mihai V. Popa, et al.
Published: (2010-01-01)

Potentiostatic, Potentiodynamic and Impedance Study of TiO2 Layers Deposited of 316 LVM Steel Used for Coronary Stents
by: Basiaga M., et al.
Published: (2016-06-01)

Fretting Corrosion Behavior of Experimental Ti-20Cr Compared to Titanium
by: Tomofumi Sawada, et al.
Published: (2017-02-01)

On the evaluation of ALD TiO2, ZrO2 and HfO2 coatings on corrosion and cytotoxicity performances
by: Mirco Peron, et al.
Published: (2021-09-01)

Electrochemical Behavior of Rejected Dental Implants in Peri-Implantitis
by: Ioana Bunoiu, et al.
Published: (2020-02-01)

Formation of Micro- and Nanostructures on the Nanotitanium Surface by Chemical Etching and Deposition of Titania Films by Atomic Layer Deposition (ALD)
by: Denis V. Nazarov, et al.
Published: (2015-12-01)

Corrosion behavior and electrochemical properties of carbon steel, commercial pure titanium, copper and copper–aluminum–nickel alloy in 3.5% sodium chloride containing sulfide ions
by: H. Nady, et al.
Published: (2017-03-01)

Effect of Annealing Temperature on the Corrosion Protection of Hot Swaged Ti-54M Alloy in 2 M HCl Pickling Solutions
by: El-Sayed M. Sherif, et al.
Published: (2017-01-01)

Corrosion Behavior in 3.5% NaCl Solutions of γ-TiAl Processed by Electron Beam Melting Process
by: Asiful Hossain Seikh, et al.
Published: (2015-12-01)

Plasma Enhanced Atomic Layer Deposition of Plasmonic TiN Ultrathin Films Using TDMATi and NH<sub>3</sub>
by: Katherine Hansen, et al.
Published: (2020-02-01)

Dataset for TiN Thin Films Prepared by Plasma-Enhanced Atomic Layer Deposition Using Tetrakis(dimethylamino)titanium (TDMAT) and Titanium Tetrachloride (TiCl4) Precursor
by: Woo-Jae Lee, et al.
Published: (2020-08-01)

USE OF TITANIUM AND TUNGSTEN AS AN ALTERNATIVE TO GOLD IN JEWELLERY MANUFACTURING
by: B.Y.R. Surnam, et al.
Published: (2017-09-01)

Mitigating Corrosion Effects of Ti-48Al-2Cr-2Nb Alloy Fabricated via Electron Beam Melting (EBM) Technique by Regulating the Immersion Conditions
by: Hany S. Abdo, et al.
Published: (2021-07-01)

A STUDY OF WELDED BUILT-UP BEAMS MADE FROM TITANIUM AND A TITANIUM ALLOY
by: Poondla, Narendra Babu
Published: (2010)

Preparation and Photocatalytic Activity of Potassium- Incorporated Titanium Oxide Nanostructures Produced by the Wet Corrosion Process Using Various Titanium Alloys
by: So Yoon Lee, et al.
Published: (2015-08-01)

Effect of voltage on microstructure and its influence on corrosion and tribological properties of TiO2 coatings
by: Hafedh Dhiflaoui, et al.
Published: (2020-05-01)

Manufacturing of Ti-6%Al and Ti-6%Al-4%V Alloys and Their Corrosion in Sodium Chloride Solutions
by: Hany S. Abdo, et al.
Published: (2020-03-01)

Structure and Properties of ZnO Coatings Obtained by Atomic Layer Deposition (ALD) Method on a Cr-Ni-Mo Steel Substrate Type
by: Marcin Staszuk, et al.
Published: (2020-09-01)

Laser Assisted Size Reduction of Gold (Au) Particles onto a Titanium (Ti) Substrate Surface
by: Oktawian Bialas, et al.
Published: (2021-09-01)

Improving the corrosion resistance of AZ91D magnesium alloy through reinforcement with titanium carbides and borides
by: Mohamed Gobara, et al.
Published: (2015-06-01)

The Effect of Film Thickness on the Gas Sensing Properties of Ultra-Thin TiO2 Films Deposited by Atomic Layer Deposition
by: Rachel L. Wilson, et al.
Published: (2018-03-01)

Effect of TiO2 nano-overlays deposited with atomic layer deposition on refractive index sensitivity of long-period gratings
by: Krzysztof Krogulski, et al.
Published: (2014-12-01)

Comparison of the corrosion behavior and surface morphology of NiTi alloy and stainless steels in sodium chloride solution
by: Kožuh S., et al.
Published: (2016-01-01)

Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings
by: Pei-Ying Tsai, et al.
Published: (2018-07-01)

Atomic layer deposited films of Al2O3 on fluorine-doped tin oxide electrodes: stability and barrier properties
by: Hana Krýsová, et al.
Published: (2021-01-01)

Growth and characterization of CNT–TiO2 heterostructures
by: Yucheng Zhang, et al.
Published: (2014-07-01)

Use of Atomic Layer Deposition to Create Bioactive Titania Nanostructures for Improved Biocompatibility of Titanium Implants
by: Humphreys, Morgan Grace
Published: (2020)

Comparative Analysis of the Corrosion Resistance of Titanium Alloys Intended to Come into Direct or Prolonged Contact with Live Tissues
by: Florina Ionescu, et al.
Published: (2019-09-01)

Physicochemical, Electrical and Electrochemical Studies on Titanium Carbide-Based Nanostructures
by: Kiran, Vankayala
Published: (2018)

Stress corrosion of titanium
by: Hollis, A. C.
Published: (1988)

Microstructural characterization of titanium alloys with fretting damage
by: Swalla, Dana Ray
Published: (2005)

Laser surface modification of titanium alloy for corrosion and tribo-corrosion resistance
by: Zhang, Nan
Published: (2018)

Microelectrode Array With Transparent ALD TiN Electrodes
by: Tomi Ryynänen, et al.
Published: (2019-03-01)

TiO2 Thin Film Interlayer for Organic Photovoltaics
by: Wu, Xin
Published: (2015)

Effect of sulfide pollution on the stability of Cu–Al–5Ni alloy in 3.5% NaCl solution
by: Nady H. El-Sayed, et al.
Published: (2014-06-01)