The computational method of substructure’s frequency response function in transfer path analysis

• Main Authors: Ke Chen, Ning Li, Shaowei Jiang
• Format: Article
• Language: English
• Published: JVE International 2020-05-01
• Series: Journal of Vibroengineering
• Subjects: transfer path analysis; substructure’s frf; dynamic mount stiffness
• Online Access: https://www.jvejournals.com/article/20892
• ISSN: 1392-8716; 2538-8460

The multi-degree-of-freedom coupled vibration system with “engine-mount-body” as the transfer path was divided into active substructure (engine), passive substructure (body) and linking components (mounts) between active and passive substructure. According to the dynamic equation of multi-degree-of-freedom coupling vibration system, the computational method of the substructure’s Frequency Response Function (FRF) was proposed. For the coupled vibration system of the real vehicle’s transfer path, the computational method of the substructure’s FRF was used to obtain the FRF of substructure and dynamic mount stiffness based on the FRF of system obtained by the hammering test. Combining the dynamic mount stiffness with the vibration acceleration of the active and passive sides of the mount, the operating load was identified based on the mount-stiffness method of the transfer path analysis. Combining the operating load with the FRF of substructure to analyze the contribution of the transfer path, the contribution of each path to the target location (the Z-direction of the front floor of the cab) was presented. The correctness of the computational method of the substructure’s FRF was presented by calculating the vibration isolation ratio of the mount, which provided theoretical support for the research of dynamic characteristics of the substructure and linking components.