Simulation of rail vehicles ride in Simpack Rail on the curved track

• Main Authors: Anton E Tarasov, Evgeniy V Serdobintsev
• Format: Article
• Language: Russian
• Published: Institute of Computer Science 2019-04-01
• Series: Компьютерные исследования и моделирование
• Subjects: complex modeling; dynamic quality parameters; train schedule; railway vehicle; cartographic track; residual acceleration
• Online Access: http://crm.ics.org.ru/uploads/crmissues/crm_2019_2/2019_02_05.pdf

The paper studies the determination for one of the dynamic quality parameter (PDK) of railway vehicles - car body lateral acceleration - by using of computer simulation system for railway vehicles dynamic Simpack Rail. This provide the complex simulation environment with variable velocity depending on the train schedule. The rail vehicle model of typical 1520 mm gauge fright locomotive section used for simulation has been verified by means of the chair "Electric multiple unit cars and locomotives" in the Russian University of Transport (RUT (MIIT)). Due to this homologation the questions of model creating and verification in preprocessor are excluded in this paper. The paper gives the detail description of cartographic track modeling in situation plane, heights plane and superelevation plane based on the real operating data. The statistic parameters (moments) for the rail related track excitation and used cartographic track data of the specified track section in this simulation are given as a numeric and graphical results of reading the prepared data files. The measurement of the car body residual lateral acceleration occur under consideration of the earth gravity acceleration part like the accelerometer measurement in the real world. Finally the desired quality parameter determined by simulation is compared with the same one given by a test drive. The calculation method in both cases is based on the middle value of the absolute maximums picked up within the nonstationary realizations of this parameter. Compared results confirm that this quality factor all the first depends on the velocity and track geometry properties. The simulation of the track in this application uses the strong conformity original track data of the test ride track section. The accepted simplification in the rail vehicle model of fright electric locomotive section (body properties related to the center of gravity, small displacements between the bodies) by keeping the geometric and force law characteristics of the force elements and constraints constant allow in Simpack Rail the simulation with necessary validity of system behavior (reactions).