| Summary: | As the usage of wireless technology grows, there are evermore demands on the antennas that support these platforms. This need has led to the design of unique antennas with improved bandwidth, agile frequency capabilities, compact size and greater efficiencies. In part though, the trade-off for such capabilities is antenna complexity. This paper presents a new technique for simplifying the method of changing the operation of a printed antenna using micron-sized silver coated particles that respond to magneto-static fields. More specifically, a structure consisting of a low-loss dielectric material with a cylindrical cavity containing micro-sized particles is developed. The overall size of the dielectric material is 1.5 mm × 1.5 mm × 0.5 mm and the cavity has a diameter of 0.9 mm. Furthermore, the top and bottom of the cavity with the micron-sized particles is capped with copper foil. Then, to manipulate the enclosed particles, a static magnet is placed near the structure. The enclosed particles columnize and orientate in the direction of the field-lines, connecting the top and bottom copper foil plates. To disconnect the plates then, the field is simply removed and the columns collapse. Macroscopically, the structure has the behavior of a switch. The structures presented in this work are denoted as Magneto-static Field Responsive Structures (MRSs). The MRSs have an additional benefit of not requiring a direct connection to a biasing circuit. This is very useful because there are many antenna designs that make it difficult to embed biasing circuitry to reconfigure printed antennas using MEMS and PIN diodes, for example. Finally, a new frequency reconfigurable Electromagnetic Band Gap (EBG) antenna is presented. This design is unique because the complex layout does not allow for traditional biasing circuitry and the operation is changed using the new MRSs presented in this paper.
|
|---|
