Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

• Main Authors: Tie Zhu, Hong Wu, Rui Zhou, Ningyi Zhang, Yong Yin, Luxin Liang, Yong Liu, Jia Li, Quan Shan, Qingxiang Li, Weidong Huang
• Format: Article
• Language: English
• Published: MDPI AG 2020-03-01
• Series: Metals
• Subjects: high-entropy alloy; tic; tribological properties; wear mechanism
• Online Access: https://www.mdpi.com/2075-4701/10/3/387

Recent studies have suggested that high-entropy alloys (HEAs) possess high fracture toughness, good wear resistance, and excellent high-temperature mechanical properties. In order to further improve their properties, a batch of TiC-reinforced FeCoNiCuAl HEA composites were fabricated by mechanical alloying and spark plasma sintering. X-ray diffractometry analysis of the TiC-reinforced HEA composites, combined with scanning electron microscopy imaging, indicated that TiC particles were uniformly distributed in the face-centered cubic and body-centered cubic phases. The room temperature hardness of the FeCoNiCuAl HEA was increased from 467 to 768 HV with the addition of TiC, owing to precipitation strengthening and fine grain strengthening effects. As the TiC content increased, the friction coefficient of the FeCoNiCuAl HEA first increased and then decreased at room temperature, due to the transition of the wear mechanism from adhesive to abrasive behavior. At higher temperature, the friction coefficient of the FeCoNiCuAl HEA monotonously reduced, corresponding well with the transition from adhesive wear to oxidative wear.