AC Dielectrophoresis Using Elliptic Electrode Geometry
This paper presents negative AC dielectrophoretic investigations using elliptic electrode geometry. Simulations of the electric field gradient variation using various ratios of the semimajor and the semiminor axis were carried out to determine the optimum elliptic geometry for the dielectrophoretic...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2011-01-01
|
| Series: | Journal of Sensors |
| Online Access: | http://dx.doi.org/10.1155/2011/204767 |
| Summary: | This paper presents negative AC dielectrophoretic investigations using elliptic electrode geometry. Simulations of the electric field gradient variation using various ratios of the semimajor and the semiminor axis were carried out to determine the optimum elliptic geometry for the dielectrophoretic electrokinetics of specimen in an assay with laminar (low Reynolds number) fluid flow. Experimental setup of the elliptic electrode assembly using PCB fabrication and electrokinetic accumulation of specimen in a dielectrophoretic cage is also being reported. Using an actuating signal between 1 kHz and 1 MHz, successful trapping of 45 μm polystyrene beads suspended in distilled water was demonstrated due to negative dielectrophoresis near 100 kHz using the novel elliptic electrode. |
|---|---|
| ISSN: | 1687-725X 1687-7268 |