Performance Evaluation of a Solar Dryer with Finny, Perforated Absorber Plate Collector Equipped with an Air Temperature Control System for Dill Drying

• Main Authors: M Razmipour, N Alavi Naeini, H Mortezapour, A Ghazanfari Moghaddam
• Format: Article
• Language: English
• Published: Ferdowsi University of Mashhad 2015-03-01
• Series: Journal of Agricultural Machinery
• Subjects: Dill; Finny perforated Collector; Solar Dryer
• Online Access: https://jame.um.ac.ir/index.php/jame/article/view/26691

Dill is one of the most important plants in the world because of its medicinal properties and it is widely used as a vegetable in the most parts of Iran. In the present study a new solar dryer with finny, perforated absorber plate collector was utilized to dry fresh dill. The dryer was comprised of a solar collector, a product container, a fan and a drying air temperature controller. The temperature controller was used as a control system to regulate the drying air temperature. Thermal performance of the dryer with finny, perforated solar collector was compared with that of a simple flat plate solar collector at different airflow rates. The effect of drying air temperature at three levels (45, 55 and 65 °C), the product size at three lengths (3, 5 and 7 cm) and two different modes of drying (mixed and indirect) on the dryer performance was investigated. The results showed that the finny, perforated absorber plate solar collector could improve the thermal efficiency about 11% in comparison with the flat plate collector and the highest thermal efficiency was achieved at the maximum airflow rate. Meanwhile, increasing the air temperature and decreasing the product size caused a significant reduction in energy consumption. Solar fraction reduced by increasing the air temperature. Finally a maximum dryer efficiency of 70% was observed at air temperature of 65 oC, product size of 3 cm with mixed mode drying.