RELATIONSHIP BETWEEN POWDER COMPOSITION AND SINGLE SCREW EXTRUSION FOR MANUFACTURING RELIABLE RANDOM CERAMIC PACKED BED ACCORDING STATISTICAL APPROACH

RELATIONSHIP BETWEEN POWDER COMPOSITION AND SINGLE SCREW EXTRUSION FOR MANUFACTURING RELIABLE RANDOM CERAMIC PACKED BED ACCORDING STATISTICAL APPROACH

The present investigation provides a detailed relationship between the powder composition and reliability of random ceramic beds. This evaluation is important due to standing in the liquid-gas contactors as well as predicting lifetime. It is still unclear whether the normal distribution is the most...

Full description

Bibliographic Details
Main Author:	Amin Salem
Format:	Article
Language:	English
Published:	University of Chemistry and Technology, Prague 2016-03-01
Series:	Ceramics-Silikáty
Subjects:	Random ceramic bed Reliability Compressive strength Failure probability Microstructure
Online Access:	http://www.ceramics-silikaty.cz/index.php?page=cs_detail_doi&id=27

Similar Items

Approaches to processing metal and ceramics through laser scanning of powder beds
by: Wright, Christopher S., et al.
Published: (2009)

The Calculation of Foundation Bed Reliability by Bearing Capacity (Shift) during Operation
by: V.S. Utkin
Published: (2014-02-01)

The isotropy of packed powder beds
by: Ahmadi-Khalili, M.
Published: (1982)

Calculation of reliability of foundation beds according to the strength criterion with limited information about the load
by: V.S. Utkin, et al.
Published: (2013-02-01)

Effect of nepheline syenite particle size on diametrical compression strength and reliability of extruded ceramic Raschig rings used in packed towers
by: Salem, Amin, et al.
Published: (2013-04-01)

Structural Ceramic Nanocomposites: A Review of Properties and Powders’ Synthesis Methods
by: Paola Palmero
Published: (2015-04-01)

In Situ Formation of a Metastable β-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V
by: Florian Huber, et al.
Published: (2018-12-01)

Influence of the Bed Type on the Flow Resistance Change During the Two-Phase (Gas + Powder) Flow through the Descending Packed Bed
by: Panic B.
Published: (2014-06-01)

Influence of Powder Bed Temperature on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Fabricated via Laser Powder Bed Fusion
by: Lei-Lei Xing, et al.
Published: (2021-04-01)

The effect of sintering temperature on reliability of extruded ceramic Raschig ring
by: Salem, A., et al.
Published: (2009-02-01)

Structural Characteristics Of Randomly Packed Beds Of Spheres
by: Rao, Ammavajjala V S
Published: (2005)

Microstructure Analysis of Thermally Etched Alumina Ceramics
by: Fudurić Jelača, M., et al.
Published: (2008-12-01)

Literature review: Methods for achieving high powder bed densities in ceramic powder bed based additive manufacturing
by: Sarah Diener, et al.
Published: (2021-12-01)

Microstructure tailoring in Electron Beam Powder Bed Fusion additive manufacturing and its potential consequences
by: Arun Ramanathan Balachandramurthi, et al.
Published: (2019-08-01)

Microstructure and mechanical properties of Si-Al-O-N ceramics
by: Bhatti, A. R.
Published: (1979)

Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys
by: Olutayo Adegoke, et al.
Published: (2020-07-01)

Laser Powder Bed Fusion of Pure Tungsten: Effects of Process Parameters on Morphology, Densification, Microstructure
by: Junfeng Li, et al.
Published: (2021-12-01)

Manufacturing Aluminum/Multiwalled Carbon Nanotube Composites via Laser Powder Bed Fusion
by: Eo Ryeong Lee, et al.
Published: (2020-09-01)

Tailoring of the Microstructure of Laser Powder Bed Fused Inconel 718 Using Solution Annealing and Aging Treatments
by: Emilio Bassini, et al.
Published: (2021-06-01)

Thermo-Mechanical Investigations of Packed Beds for High Temperature Heat Storage: Uniaxial Compression Test Experiments and Particle Discrete Simulations
by: Philipp Knödler
Published: (2019-04-01)

Grain refinement in laser powder bed fusion: The influence of dynamic recrystallization and recovery
by: Hossein Eskandari Sabzi, et al.
Published: (2020-11-01)

Understanding powder bed fusion additive manufacturing phenomena via numerical simulation
by: P. Ferro, et al.
Published: (2020-07-01)

Numerical Simulations of Thermo-Fluid Phenomena in Microwave Heated Packed and Fluidized Beds
by: Savransky, Max
Published: (2011)

The effect of wall thickness distribution on mechanical reliability and strength in unidirectional porous ceramics
by: Jordi Seuba, et al.
Published: (2016-01-01)

RELIABILITY,COMPONENT OF INDUSTRIAL PRODUCTION QUALITY
by: Monica BALDEA
Published: (2012-05-01)

Laser powder bed fusion of an engineering intermetallic TiAl alloy
by: D. Schimbäck, et al.
Published: (2021-03-01)

Cuboid Packed-Beds as Chemical Reactors?
by: Raja Ghosh
Published: (2018-05-01)

Wall Effects In Packed Beds
by: Sita Ram Rao, K V
Published: (2005)

Analysis of the interaction between properties and microstructure of construction ceramics
by: Olena Khomenko, et al.
Published: (2018-08-01)

Preparation of basalt-based glass ceramics
by: Matović Branko Z., et al.
Published: (2003-01-01)

Preparation of basalt-based glass ceramics
by: MIHOVIL LOGAR, et al.
Published: (2003-06-01)

The flow in, and structure of, narrow packed beds
by: Griffiths, N. B.
Published: (1986)

The formation mechanism of the porous structure of glass ceramics from siliceous rock
by: Anatolij Ermakov, et al.
Published: (2020-12-01)

Strengthening of HT250 by modified ultra-fine ceramic powders
by: Bo Yuan, et al.
Published: (2015-11-01)

Calculation of reliability of foundation bed in the deformations at the operational stage
by: V.S. Utkin, et al.
Published: (2013-06-01)

The Average Grain Size and Grain Aspect Ratio in Metal Laser Powder Bed Fusion: Modeling and Experiment
by: Morgan Letenneur, et al.
Published: (2020-03-01)

Models for the analysis of thermal dispersion in packed beds
by: Sabri, M. N.
Published: (1985)

Microstructure/electrical property correlations in ceramic matrix composites
by: Kokan, Julie Runyan
Published: (2008)

CALCULATION OF PARTICLES FLOW TEMPERATURE DURING PLASMA SPRAYING OF MIXTURE CONSISTING OF SELF-FLUXING POWDER AND CERAMICS
by: A. S. Kalinichenko, et al.
Published: (2018-05-01)

Laser Powder Bed Fusion of Potential Superalloys: A Review
by: Prince Valentine Cobbinah, et al.
Published: (2021-12-01)