On the Generation of Harmonics by the Non-Linear Buckling of an Elastic Beam

• Main Authors: Luiz M. B. C. Campos, Manuel J. S. Silva
• Format: Article
• Language: English
• Published: MDPI AG 2021-06-01
• Series: Applied Mechanics
• Subjects: non-linear buckling; large slope; Euler–Bernoulli beam theory; uniform elastic beams; critical buckling load; buckled elastica
• Online Access: https://www.mdpi.com/2673-3161/2/2/22

The Euler–Bernoulli theory of beams is usually presented in two forms: (i) in the linear case of a small slope using Cartesian coordinates along and normal to the straight undeflected position; and (ii) in the non-linear case of a large slope using curvilinear coordinates along the deflected position, namely, the arc length and angle of inclination. The present paper starts with the exact equation in a third form, that is, (iii) using Cartesian coordinates along and normal to the undeflected position like (i), but allowing exactly the non-linear effects of a large slope like (ii). This third form of the equation of the elastica shows that the exact non-linear shape is a superposition of linear harmonics; thus, the non-linear effects of a large slope are equivalent to the generation of harmonics of a linear solution for a small slope. In conclusion, it is shown that: (i) the critical buckling load is the same in the linear and non-linear cases because it is determined by the fundamental mode; (ii) the buckled shape of the elastica is different in the linear and non-linear cases because non-linearity adds harmonics to the fundamental mode. The non-linear shape of the elastica, for cases when powers of the slope cannot be neglected, is illustrated for the first four buckling modes of cantilever, pinned, and clamped beams with different lengths and amplitudes.