A Further Finite Element Stress Analysis of Angled Abutments for an Implant Placed in the Anterior Maxilla
To systematically measure and compare the stress distribution on the bone around an implant in the anterior maxilla using angled abutments by means of finite element analysis, three-dimensional finite element simplified patient-specific models and simplified models were created and analyzed. Systema...
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2015-01-01
|
| Series: | Computational and Mathematical Methods in Medicine |
| Online Access: | http://dx.doi.org/10.1155/2015/560645 |
| Summary: | To systematically measure and compare the stress distribution on the bone around an implant in the anterior maxilla using angled abutments by means of finite element analysis, three-dimensional finite element simplified patient-specific models and simplified models were created and analyzed. Systematically varied angled abutments were simulated, with angulation ranging from 0° to 60°. The materials in the current study were assumed to be homogenous, linearly elastic, and isotropic. Force of 100 N was applied to the central node on the top surface of the abutments to simulate the occlusal force. To simulate axial and oblique loading, the angle of loading was 0°, 15°, and 20° to the long axis of implant, respectively. There was the strong resemblance between the response curves for simplified patient-specific models and simplified models. Response curves under oblique loading were similar in both models. With abutments angulation increased, maximum von Mises stress firstly decreased to minimum point and then gradually increased to higher level. From a biomechanical point of view, favorable peri-implant stress levels could be induced by angled abutments under oblique loading if suitable angulation of abutments was selected. |
|---|---|
| ISSN: | 1748-670X 1748-6718 |