Effect of nodule count and austempering heat treatment on segregation behavior of alloying elements in ductile cast iron
The equilibrium partition ratio, k, has been measured for Mn, Mo, Si, Ni and Cu in a ductile iron with composition (wt.%): 3.45C, 0.25Mn, 0.25Mo, 2.45Si, 0.5Ni and 0.5Cu with different nodule counts obtained from different section sizes of 13, 25, 75 mm in the as cast, austenitized (at 870 °C for ti...
Main Authors: | E. Akbarzadeh Chiniforush, N. Iranipour, S. Yazdani |
---|---|
Format: | Article |
Language: | English |
Published: |
Foundry Journal Agency
2016-05-01
|
Series: | China Foundry |
Subjects: | |
Online Access: | http://ff.foundryworld.com/uploadfile/2016060852927621.pdf |
Similar Items
-
Influence of cooling conditions and amount of retained austenite on the fracture of austempered ductile iron
by: Goryany Vyacheslav, et al.
Published: (2008-01-01) -
Influence of cooling conditions and amount of retained austenite on the fracture of austempered ductile iron
by: VYACHESLAV GORYANY, et al.
Published: (2008-01-01) -
Microstructure and mechanical properties of CuNiMo austempered ductile iron
by: Erić Olivera, et al.
Published: (2004-01-01) -
Effect of sub-zero cooling on microstructure and mechanical properties of a low alloyed austempered ductile iron
by: M. Ardestani, et al.
Published: (2007-05-01) -
The Effects of Molybdenum and Manganese on the Mechanical Properties of Austempered Ductile Iron
by: Dražen Živković, et al.
Published: (2018-01-01)