Development of a powerful lowvoltage DC converter for systems of electric power accumulation
The study offers a solution to the problem associated with the use of batteries in autonomous solar and wind power plants, power installations, and electric vehicles. It is known that one battery element can produce 1.2–4 V, which is not enough for subsequent transformations. There is a need to comp...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
PC Technology Center
2020-04-01
|
| Series: | Eastern-European Journal of Enterprise Technologies |
| Subjects: | |
| Online Access: | http://journals.uran.ua/eejet/article/view/198950 |
| Summary: | The study offers a solution to the problem associated with the use of batteries in autonomous solar and wind power plants, power installations, and electric vehicles. It is known that one battery element can produce 1.2–4 V, which is not enough for subsequent transformations. There is a need to complete the battery, in series-parallel connection, with several elements to several thousand elements. During its operation, slight deviations of the voltage of the elements occur, which subsequently accumulate and lead to the battery failure. To prevent such phenomena, diagnostics with an accuracy of 0.1–0.001 V per element is necessary. This complicates the control system and forces the entire battery to be rejected in case of failure of a certain number of elements. The load on the surrounding space for the disposal of lead, lithium, and cadmium is increasing. It has been established that effective converters of direct current to direct current at the indicated voltages and capacities do not exist. Voltage converters from level 3 use an intermediate link to convert the magnetic field. This type of low voltage converter is used only at low power.
It was proved that a significant number of battery elements connected in a series in parallel can be replaced with one equivalent in energy. The conducted tests have established that it is advisable to produce a subsequent increase in voltage with ionistors by charging them in parallel followed by a discharge in the series.
A mathematical description of the operation of the converter was developed, starting from the moment of switching on and reaching the steady state with subsequent response to a change in the load. Since the operation of the converter involves significant currents, the components of the internal resistances of all elements are taken into account. This approach helps study possible technical implementations, identify patterns when varying its parameters, and optimize conditions, depending on the type of chemical elements and consumer power |
|---|---|
| ISSN: | 1729-3774 1729-4061 |