Tectonic inheritance controls nappe detachment, transport and stacking in the Helvetic nappe system, Switzerland: insights from thermomechanical simulations
<p>Tectonic nappes have been investigated for more than a hundred years. Although geological studies often refer to a “nappe theory”, the physical mechanisms of nappe formation are still disputed. We apply two-dimensional numerical simulations of shortening of a passive margin to investigate t...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Copernicus Publications
2020-03-01
|
| Series: | Solid Earth |
| Online Access: | https://www.solid-earth.net/11/287/2020/se-11-287-2020.pdf |
| Summary: | <p>Tectonic nappes have been investigated for more than a hundred years.
Although geological studies often refer to a “nappe theory”, the physical mechanisms of nappe formation are still disputed.
We apply two-dimensional numerical simulations of shortening of a passive margin to investigate the thermomechanical processes of detachment (or shearing off), transport and stacking of nappes.
We use a visco-elasto-plastic model with standard creep flow laws, Drucker–Prager and von Mises yield criteria.
We consider tectonic inheritance with two initial mechanical heterogeneities: (1) lateral heterogeneity of the basement–cover interface due to half-grabens and horsts and (2) vertical heterogeneities due to layering of mechanically strong and weak sedimentary units.
The model shows detachment and horizontal transport of a thrust nappe that gets stacked on a fold nappe.
The detachment of the thrust sheet is triggered by stress concentrations around the sediment–basement contact and the resulting brittle–plastic shear band that shears off the sedimentary units from the sediment–basement contact.
Horizontal transport is facilitated by a basal shear zone just above the basement–cover contact, composed of thin, weak sediments that act as a décollement.
Fold nappe formation occurs by a dominantly ductile closure of a half-graben and the associated extrusion of the half-graben fill.
We apply our model to the Helvetic nappe system in western Switzerland, which is characterized by stacking of the Wildhorn thrust nappe above the Morcles fold nappe.
The modeled structures, the deformation rates and the temperature field agree with data from the Helvetic nappe system.
Mechanical heterogeneities must locally generate effective viscosity (i.e., ratio of stress to viscoplastic strain rate) contrast of about 3 orders of magnitude to model nappe structures similar to the ones of the Helvetic nappe system.
Our results indicate that the structural evolution of the Helvetic nappe system was controlled by tectonic inheritance and that material softening mechanisms are not essential to reproduce the first-order nappe structures.</p> |
|---|---|
| ISSN: | 1869-9510 1869-9529 |