Effect of micro sized marble sludge on physical properties of natural rubber composites

• Main Authors: Ahmed Khalil, Nizami Shaikh Sirajuddin, Raza Nudrat Zahid, Mahmood Khalid
• Format: Article
• Language: English
• Published: Association of the Chemical Engineers of Serbia 2013-01-01
• Series: Chemical Industry and Chemical Engineering Quarterly
• Subjects: natural rubber; composites; marble sludge; filler; cure characteristics; mechanical properties; thermal aging
• Online Access: http://www.doiserbia.nb.rs/img/doi/1451-9372/2013/1451-93721200062A.pdf

Marble waste as sludge is collected from Marble industry, as a way of solving the environmental problem of industrial waste. The sludge was dried, ground and passed through desire sieves (10, 15, 20, 37 and 75 μm), This powder was characterized by the X-ray fluorescence technique and then incorporated in the formulation of NR composites with different loading of micro sized MS particles (20, 40, 60, 80 and 100 parts per hundred of rubber, phr). The cure characteristics, mechanical properties and swelling properties of MS/NR composites were evaluated. Results indicate that minimum torque, maximum torque, tensile strength, modulus, tear strength, hardness, crosslink density were increased while the scorch time, cure time, cure rate, cure rate index (CRI), elongation at break, compression set, rebound resilience, abrasion loss, swelling coefficient, average molecular weight and filler-rubber interaction decrease with increasing MS loading.