GEAR WHEELS THE PROCESSED BY ELECTRICAL EROSION
For low tooth loads and low peripheral speeds between 0.3 and 2 m / s are chosen based alloys and steels, gray cast iron. In industry are preferable ferrous alloys: bronze, brass and aluminum alloys, and where speeds and demands are low gears are made of sheet steel or alloys. Wheel group required...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Academica Brancusi
2015-12-01
|
| Series: | Fiabilitate şi Durabilitate |
| Subjects: | |
| Online Access: | http://www.utgjiu.ro/rev_mec/mecanica/pdf/2015-02/12_Marcel%20S.POPA,%20Ioan%20BADIU%20-%20GEAR%20%20WHEELS%20%20THE%20%20PROCESSED%20%20BY%20%20ELECTRICAL%20%20EROSION.pdf |
| Summary: | For low tooth loads and low peripheral speeds between 0.3 and 2 m / s are chosen based alloys
and steels, gray cast iron. In industry are preferable ferrous alloys: bronze, brass and aluminum alloys, and
where speeds and demands are low gears are made of sheet steel or alloys. Wheel group required less include
some hand-operated mechanisms, such as jacks, some trolls. These wheels are larger and they are made of
alloy steel, semi-hard and sometimes gray cast iron FC250, FC300.
|
|---|---|
| ISSN: | 1844-640X 1844-640X |