AN ELASTIC STRESS ANALYSIS FOR A POLYMER MATRIX COMPOSITE CANTILEVER BEAM SUBJECTED TO A SINGLE TRANSVERSE FORCE

• Main Authors: Ayla TEKİN, Ümran ESENDEMİR, Ayşe ÖNDÜRÜCÜ
• Format: Article
• Language: English
• Published: Pamukkale University 2004-03-01
• Series: Pamukkale University Journal of Engineering Sciences
• Subjects: Elasto-plastik gerilme, Ankastre kiriş, Polimer matriks
• Online Access: http://dergipark.ulakbim.gov.tr/pajes/article/view/5000089678
• ISSN: 1300-7009; 2147-5881

In this study, elasto-plastic stress analysis is carried out in a polymer matrix composite cantilever beam of arbitrary fiber orientation subjected to a single transverse force applied to the free end by using the anisotropic elasticity theory. The residual stress component of ?x and yield points are determined for 0°, 30°, 45°, 60° and 90° fiber orientation angles. The yielding begins for 0° and 90° fiber orientation angles at the upper and lower surfaces of the beam at the same distances from the free end. It is seen that the yielding begins for 30°, 45° and 60° fiber orientation angles at the upper surface of the beam. The intensity of the residual stress component of ?x is maximum at the upper and lower surfaces of the beam. In this study, the residual stress component of ?x obtained for the polymer matrix composite thermoplastic cantilever beam reinforced by reinforced unidirectional fibers is compared with that of the thermoplastic cantilever beam reinforced by woven Cr-Ni steel fibers.