Pile Load Test Results as a Basis for Reliability Calculation with Parabolic Response Surface
The paper will discuss a method of analysing head displacements of piles subjected to lateral load test that is suitable for reliability calculation. The obtained results will be used for writing down the serviceability limit state equation related to a pile representing the group of piles under inv...
Main Authors: | Jerzy Bauer, Wojciech Puła, Marek Wyjadłowski |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
2018-01-01
|
Series: | Tehnički Vjesnik |
Subjects: | |
Online Access: | https://hrcak.srce.hr/file/293215 |
Similar Items
-
Influence of varying soil properties on evaluation of pile reliability under lateral loads
by: Janusz Kozubal, et al.
Published: (2013-04-01) -
Development of improved models for pile load bearing capacity, settlement and reliability analysis
by: Vladimir S. Utkin, et al.
Published: (2020-06-01) -
Reliability analysis of an end-bearing pile with account for friction forces on the pile surface
by: Vladimir S. Utkin
Published: (2020-03-01) -
Application of monte carlo simulation method to estimate the reliability of design problem of the bored pile according to limited state
by: Tran Ngoc Tuan, et al.
Published: (2016-12-01) -
Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction
by: Petar Santrač*, et al.
Published: (2020-01-01)