Chemical Forms of Important Fission Products in Primary Circuit of HTR-PM under Conditions of Normal Operation and Overpressure and Water Ingress Accidents: A Study with a Chemical Thermodynamics Approach

• Main Authors: Chuan Li, Wenqian Li, Lifeng Sun, Haoyu Xing, Chao Fang
• Format: Article
• Language: English
• Published: Hindawi Limited 2019-01-01
• Series: Science and Technology of Nuclear Installations
• Online Access: http://dx.doi.org/10.1155/2019/4251280

The chemical forms of important fission products (FPs) in the primary circuit are essential to the source term analysis of high-temperature gas-cooled reactors because the volatility, transfer, and diffusion of these radionuclides are significantly influenced by their chemical forms. Through chemical reactions with gaseous impurities in the primary circuit, these FPs exist in diverse chemical forms, which vary under different operational conditions. In this paper, the chemical forms of cesium (Cs), strontium (Sr), silver (Ag), iodine (I), and tritium in the primary circuit of the Chinese pebble-bed modular high-temperature gas-cooled reactor (HTR-PM) under normal conditions and accident conditions (overpressure and water ingress accident) are studied with chemical thermodynamics. The results under normal conditions show that Cs exists mainly in the form of Cs2CO3 at 250°C and gaseous form at 750°C, and for I and Ag, Ag3I3 and Ag convert to gaseous CsI and AgO, respectively, with increasing temperature, while SrCO3 is the only main kind of compound for Sr. It is also observed that new compounds are generated under accidents: I exists in HI form when a water ingress accident occurs. Regarding tritium, the chemical forms of FPs change little, but compounds need higher temperature to convert. Furthermore, hazard of some FPs in different chemical forms is also discussed comprehensively in this paper. This study is significant for understanding the chemical reaction mechanisms of FPs in an HTR-PM, and furthermore it may provide a new point of view to analyze the interaction between FPs and structural materials in reactor as well as their hazards.