Effect of Electronic Conductivities of Iridium Oxide/Doped SnO2 Oxygen-Evolving Catalysts on the Polarization Properties in Proton Exchange Membrane Water Electrolysis

• Main Authors: Hideaki Ohno, Shinji Nohara, Katsuyoshi Kakinuma, Makoto Uchida, Hiroyuki Uchida
• Format: Article
• Language: English
• Published: MDPI AG 2019-01-01
• Series: Catalysts
• Subjects: proton exchange membrane water electrolysis; anode catalyst; oxygen evolution reaction; iridium; tin oxide
• Online Access: http://www.mdpi.com/2073-4344/9/1/74

We have developed IrOx/M-SnO2 (M = Nb, Ta, and Sb) anode catalysts, IrOx nanoparticles uniformly dispersed on M-SnO2 supports with fused-aggregate structures, which make it possible to evolve oxygen efficiently, even with a reduced amount of noble metal (Ir) in proton exchange membrane water electrolysis. Polarization properties of IrOx/M-SnO2 catalysts for the oxygen evolution reaction (OER) were examined at 80 °C in both 0.1 M HClO4 solution (half cell) and a single cell with a Nafion® membrane (thickness = 50 μm). While all catalysts exhibited similar OER activities in the half cell, the cell potential (Ecell) of the single cell was found to decrease with the increasing apparent conductivities (σapp, catalyst) of these catalysts: an Ecell of 1.61 V (voltage efficiency of 92%) at 1 A cm−2 was achieved in a single cell by the use of an IrOx/Sb-SnO2 anode (highest σapp, catalyst) with a low Ir-metal loading of 0.11 mg cm−2 and Pt supported on graphitized carbon black (Pt/GCB) as the cathode with 0.35 mg cm−2 of Pt loading. In addition to the reduction of the ohmic loss in the anode catalyst layer, the increased electronic conductivity contributed to decreasing the OER overpotential due to the effective utilization of the IrOx nanocatalysts on the M-SnO2 supports, which is an essential factor in improving the performance with low noble metal loadings.