Effect of the aging process at a temperature of 300 degrees Celsius of Ti6Al4V alloy on mechanical strength under static loading conditions
Conventional construction of components is slowly being replaced by rapid prototyping and the use of DMLS technology. The development of DMLS requires conducting experimental studies that build a knowledge base that allows for the averaging of mechanical properties. verification of how the initiatio...
Main Author: | Wirwicki Mateusz |
---|---|
Format: | Article |
Language: | English |
Published: |
EDP Sciences
2019-01-01
|
Series: | MATEC Web of Conferences |
Online Access: | https://www.matec-conferences.org/articles/matecconf/pdf/2019/39/matecconf_mse2019_08017.pdf |
Similar Items
-
Strength analysis of Ti6Al4V titanium alloy produced by the use of additive manufacturing method under static load conditions
by: Karolina Karolewska, et al.
Published: (2020-03-01) -
Flexural strength comparison of self-synthesised porcelain with the sintering temperature of 1150 degree Celsius and 1200 degree Celsius
by: Joseph Gunawan, et al.
Published: (2018-11-01) -
Some creep characteristics of beryllium-copper at 300degrees Celsius.
by: Curry, James G.
Published: (2012) -
Residential Water Heater Temperature: 49 or 60 Degrees Celsius?
by: Benoît Lévesque, et al.
Published: (2004-01-01) -
The effect of high temperatures (30 degrees Celsius) on biological nutrient removal performance
by: Mellin, Hannu Kaarlo Olavi
Published: (2016)