INFLUENCE OF ADDITIONAL DEFORMATIONS ON MECHANICAL CHARACTERISTICS OF COLD-WORKED WIRE IN CONDITIONS OF COMPLICATED-STRESSED STATE

INFLUENCE OF ADDITIONAL DEFORMATIONS ON MECHANICAL CHARACTERISTICS OF COLD-WORKED WIRE IN CONDITIONS OF COMPLICATED-STRESSED STATE

It is determined that maximal diameter of the wire at drawing through one and the same die corresponds to size of unit squeezing 0,5-1,0%.

Bibliographic Details
Main Author:	A. I. Demidov
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2008-08-01
Series:	Litʹë i Metallurgiâ
Online Access:	https://lim.bntu.by/jour/article/view/1273

Similar Items

THE WAYS OF PRODUCTION OF THE COLD-DRAWN WIRE WITH INCREASED PLASTICITY BY MEANS OF ADDITIONAL RADIAL DEFORMATIONS
by: A. V. Demidov
Published: (2006-11-01)

The influence of previous thermal history upon the properties and deformation characteristics of cold drawn plain carbon steel wires
by: Wallis, G. K.
Published: (1975)

Influence of a cold deformation process by drawing on the electrical properties of copper wires
by: Rafael da Silva Bernardo, et al.

Influence of a modified drawing process on the resulting residual stress state of cold drawn wire
by: Baumann Markus, et al.
Published: (2018-01-01)

Research of the influence of highcarbon steel wire drawing speed on stresses and deformations on wire cross section
by: Yu. L. Bobarikin, et al.
Published: (2019-04-01)

The influence of gelatine on the corrosion behaviour of cold worked copper wire in alkaline media
by: Ivanov Svetlana, et al.
Published: (2006-01-01)

Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer
by: Renan Medeiros Kindermann, et al.
Published: (2020-10-01)

GMAW Cold Wire Technology for Adjusting the Ferrite–Austenite Ratio of Wire and Arc Additive Manufactured Duplex Stainless Steel Components
by: Juliane Stützer, et al.
Published: (2019-05-01)

The Work Softening Behavior of Pure Mg Wire during Cold Drawing
by: Liuxia Sun, et al.
Published: (2018-04-01)

Correlation between Microstructures and Ductility Parameters of Cold Drawn Hyper-Eutectoid Steel Wires with Different Drawing Strains and Post-deformation Annealing Conditions
by: Jin Young Jung, et al.
Published: (2021-01-01)

Effects of Wire Drawing and Annealing Conditions on Torsional Ductility of Cold Drawn and Annealed Hyper-Eutectoid Steel Wires
by: Jin Young Jung, et al.
Published: (2020-08-01)

Properties and deformation characteristics of mechanically worked sintered billets
by: Alkatib, Hassan S.
Published: (1982)

INFLUENCE OF THE SURFACE DEFECTS INHERITED FROM ROLLED WIRE ON QUALITY OF COLD DRAWN WIRE
by: A. N. Savenok, et al.
Published: (2012-11-01)

Influence of Stress State on the Mechanical Impact and Deformation Behaviors of Aluminum Alloys
by: Marcos Rodriguez-Millan, et al.
Published: (2018-07-01)

STUDY OF NUMERICAL MODELING OF SHAPE DEFORMING ZONE OF DIES, DURING DRAWING HIGH CARBON STEEL WIRE TO THE TEMPERATURE AND THE STRESS-STRAIN STATE IN THE WIRE AND DIE
by: O. L. Bobarikin, et al.
Published: (2012-09-01)

INVESTIGATION BY NUMERICAL MODELING OF INFLUENCE OF THE SHAPE OF DEFORMING ZONE OF DIE AT WIRE DRAWING OF STEEL HIGH-CARBON WIRE ON TEMPERATURE AND MODE OF DEFORMATION IN WIRE AND DIE
by: Ju. L. Bobarikin, et al.
Published: (2010-05-01)

The experience of modernization of mills of wet wire drawing for the metal wire cord
by: A. V. Demidov, et al.
Published: (2019-01-01)

Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology
by: Mikel Casuso, et al.
Published: (2021-04-01)

Experimental analysis and simulations of the effects of deposition conditions on deformation characteristics of Al-6061 powders in cold-spray
Published: ()

INFLUENCE OF SURFACE DEFECTS, INHERITED FROM ROLLED WIRE, ON QUALITY OF A COLD-DRAWN WIRE
by: A. N. Savenok, et al.
Published: (2012-02-01)

Effect of cold-working process on cyclic deformation of electrolytic copper
by: Gustavo Aristides Santana Martinez, et al.

STRUCTURE AND CHARACTERISTICS OF PATENTED HIGH-CARBON WIRE
by: A. Ju. Borisenko, et al.
Published: (2011-02-01)

Thermo-mechanical analysis of wire and arc additive manufacturing process
by: Ding, J.
Published: (2012)

Experiments Regarding Thermal and Mechanical Deformations of Continuous Cast Steel Wire
by: Marian BORDEI, et al.
Published: (2020-06-01)

The Research on the Surface Reduction Rate of the Carbon Steel Wire Rod Materials with the Cold Working
by: Hung,Tien Yu, et al.
Published: (2012)

Investigation of the stress-deformation state of a bolt-joint assembly of cold-bent thin-walled profiles
by: Ivan L. Kuznetsov, et al.
Published: (2019-07-01)

INFLUENCE OF BAINITE STRUCTURE ON MECHANICAL CHARACTERISTICS OF HIGH-CARBON WIRE
by: A. Ju. Borisenko, et al.
Published: (2009-11-01)

STATISTICAL ANALYSIS OF INTERRELATIONS BETWEEN ROD CHARACTERISTICS AND DEFORMATION PROPERTIES OF PRODUCED WIRE
by: A. N. Chichko, et al.
Published: (2010-05-01)

Halloysite Nanotubes as an Additive to Ensure Enhanced Characteristics of Cold-Curing Epoxy Resins Under Fire Conditions
by: Jaroslav Hornak, et al.
Published: (2020-08-01)

Optimization of Cold Metal Transfer-Based Wire Arc Additive Manufacturing Processes Using Gaussian Process Regression
by: Seung Hwan Lee
Published: (2020-04-01)

The propagation of plastic deformation in wires and cylinders
by: Friedlander, F. G.
Published: (1946)

An analysis of the deformation mechanisms of textile structures under varying conditions of stress
by: Backer, Stanley
Published: (2009)

The Study on the Quality of Cold Forging Wire of Fasteners
by: OU,HUI-CHEN, et al.
Published: (2018)

Cold drawing of austenitic stainless steel wire
by: Howard, James Henry.
Published: (2021)

Thermo-Mechanical Modeling of Wire-Fed Electron Beam Additive Manufacturing
by: Fatih Sikan, et al.
Published: (2021-02-01)

Mechanical and microstructural testing of wire and arc additively manufactured sheet material
by: Pinelopi Kyvelou, et al.
Published: (2020-07-01)

Microstructural and Mechanical Characteristics of Novel 6% Cr Cold-Work Tool Steel
by: Singon Kang, et al.
Published: (2017-01-01)

Effects of recrystallization annealing on mechanical properties of cold-rolled PdNi5 wires
by: Aleksandra Ivanović, et al.
Published: (2016-03-01)

Experimental and theoretical studies on stresses in and deformation of wire ropes under axial tensile load
by: Utting, W. S.
Published: (1984)

Deformation characteristics and textures of cold rolled fibre-reinforced copper composites
by: Gilbert, S. M.
Published: (1979)