Preparation of Xylan-<i>g</i>-/P(AA-<i>co</i>-AM)/GO Nanocomposite Hydrogel and its Adsorption for Heavy Metal Ions

Xylan-<i>g</i>-/P(AA-<i>co</i>-AM)/Graphene oxide (GO) hydrogels were prepared and used in the removal of heavy mental ions. Acrylamide (AM), acrylic acid (AA), and xylan were used as the raw materials to prepare the hydrogels with ammonium persulfate (APS) as the initiator....

Full description

Bibliographic Details
Main Authors: Weiqing Kong, Minmin Chang, Chunhui Zhang, Xinxin Liu, Bei He, Junli Ren
Format: Article
Language:English
Published: MDPI AG 2019-04-01
Series:Polymers
Subjects:
Online Access:https://www.mdpi.com/2073-4360/11/4/621
Description
Summary:Xylan-<i>g</i>-/P(AA-<i>co</i>-AM)/Graphene oxide (GO) hydrogels were prepared and used in the removal of heavy mental ions. Acrylamide (AM), acrylic acid (AA), and xylan were used as the raw materials to prepare the hydrogels with ammonium persulfate (APS) as the initiator. The prepared hydrogels were characterized by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and energy dispersive X-ray (EDX). Some important properties of nanocomposite hydrogels such as swelling behavior, mechanical property, and adsorption capacity were also examined as well as the regeneration of the hydrogels. The results showed that the prepared hydrogels reached the equilibrium state of swelling after 12 h, and the compressive strength of the hydrogel with 30 mg of GO could reach up to 203 kPa. Compared with traditional hydrogel, the mechanical properties of the hydrogels with GO were obviously improved. The maximum adsorption capacity of hydrogels for Pb<sup>2+</sup>, Cd<sup>2+</sup>, and Zn<sup>2+</sup> could reach up to 683 mg/g, 281 mg/g, and 135 mg/g, respectively. After five cycles of adsorption and desorption, the recovery rate of the hydrogels on Pb<sup>2+</sup>, Cd<sup>2+</sup>, and Zn<sup>2+</sup> was still up to 87%, 80%, and 80%, respectively&#8212;all above 80%.
ISSN:2073-4360