| Summary: | The paper aims to investigate the processing execution of SS316 in manageable machining cooling ways such as dry, wet, and cryogenic (LN2-liquid nitrogen). Furthermore, “one parametric approach” was utilized to study the influence and carry out the comparative analysis of LN2over dry and LN2over wet machining conditions. Response surface methodology (RSM) is incorporated to build a relationship model among the considered independent variables (spindle speed: (S, rpm), feed rate (F, mm/min), and depth of cut (doc) (D, mm)) and the dependent variable (surface roughness (Ra)). Since there is the involvement of more than one independent variable, the generation of regression equation is “multiple linear regression.” Based on the attained coefficient value of the independent variable, the respective impact on surface roughness is identified. The results of comparative analysis of LN2over dry and LN2over wet machining states revealed that LN2 machining yielded better surface finish with up to 64.9%, 54.9% over dry and wet machining, respectively, indicating the benefits of LN2 for achieving better Ra. The benchmark function of the proposed mode hybrid-bias (BNN-SVR) algorithm showcases the propensity to emerge out of the local minimum and coincide with the optimal target value. The performance of the (BNN-SVR) is a prevalent new ability to fetch the partially trained weights from the BNN model into the SVR model, thus leading to the conversion of static learning capability to dynamic capability. The performances of the adopted prediction approaches are compared through a range of attained error deviation, i.e., (RA: 3.95%–8.43%), (BNN: 2.36%–5.88%), (SVR: 1.04%–3.61%), respectively. Hybrid-bias (BNN-SVR) is the best suitable prediction model as it provides significant evidence by attaining less error in predicting Ra. However, SVR surpasses BNN and RSM approaches because of the convergence factor and narrow margin error.
|
|---|
