Micro-distribution and mechanical characteristics analysis of remaining oil

• Main Authors: Hongxia Sun, Yujie Zhao, Jun Yao
• Format: Article
• Language: English
• Published: KeAi Communications Co., Ltd. 2017-12-01
• Series: Petroleum
• Online Access: http://www.sciencedirect.com/science/article/pii/S2405656116302061

As the water drive reservoir enters extra high water cut stage (greater than 80%), remaining oil distribution becomes increasingly dispersed. Research on micro residual oil in pore appears particularly important for reservoir development at extra high water cut stage. Oil occurrence characteristics recognition helps to understand the distribution of remaining oil and the mechanical characteristics of oil is the guide for tapping the remaining oil. On the basis of pore scale oilâwater two phase flow experiments, micro distribution of remaining oil is divided into four occurrence states in accordance with oil features at different stage of water flooding, the flake of remaining oil, oil column, oil droplet and oil film. A quantitative characterization method of remaining oil occurrence states is established. By using micro numerical simulation method, change rules of four occurrence states of remaining oil during the process of water displacement and the mechanical characteristics of different occurrence state of remaining oil are analyzed. Results show that the continuous oil phase gradually transforms to discontinuous phase and even to dispersed phases during the water flooding process. At extra high water cut stage, most of remaining oil are dispersed oil columns, oil droplets and oil films, which are the main target of remaining oil to be tapped. By changing water flow direction or increasing the displacement pressure gradient, the surface adsorption force acting on oil columns are overcome, and then the oil columns begin to move and finally to be produced out. Oil droplets in pore-throat center are scoured and carried out by water as the increase of the injection volume, while the oil droplets in blind ends and the oil films are extracted out by adding chemicals to reduce the interfacial tension, so as to enhance oil recovery. For water flooding reservoir, the corresponding tapping measures for four types of oil occurrence states brought forward have great meanings of improving reservoir recovery at high water cut stage. Keywords: Pore scale, Remaining oil, Occurrence characteristics, Mechanical characteristics, Extra high water cut stage