Thermal CFD Analysis of Tubular Light Guides

• Main Authors: Ondřej Šikula, Jitka Mohelníková, Josef Plášek
• Format: Article
• Language: English
• Published: MDPI AG 2013-12-01
• Series: Energies
• Subjects: computer simulation; ANSYS Fluent; CFD model; tubular light guides; thermal bridges; temperature distribution; air flow; thermal radiation; discrete transfer radiation model
• Online Access: http://www.mdpi.com/1996-1073/6/12/6304

Tubular light guides are applicable for daylighting of windowless areas in buildings. Despite their many positive indoor climate aspects they can also present some problems with heat losses and condensation. A computer CFD model focused on the evaluation of temperature distribution and air flow inside tubular light guides of different dimensions was studied. The physical model of the tested light guides of lengths more than 0.60 m proves shows that Rayleigh numbers are adequate for a turbulent air flow. The turbulent model was applied despite the small heat flux differences between the turbulent and laminar model. The CFD simulations resulted into conclusions that the growing ratio of length/diameter increases the heat transmission loss/linear transmittance as much as by 50 percent. Tubular light guides of smaller diameters have lower heat transmission losses compared to the wider ones of the same lengths with the same outdoor temperature being taken into account. The simulation results confirmed the thermal bridge effect of the tubular light guide tube inside the insulated flat roof details. The thermal transmittance of the studied light guides in the whole roof area was substituted with the point thermal bridges. This substitution gives possibility for simple thermal evaluation of the tubular light pipes in roof constructions.