Effect of simulated chairside grinding procedures using commercially available abrasive agents on the surface properties of zirconia

• Main Authors: Ramandeep Sandhu, Mohit Kheur, Supriya Kheur
• Format: Article
• Language: English
• Published: Wolters Kluwer Medknow Publications 2017-01-01
• Series: The Journal of Indian Prosthodontic Society
• Subjects: Carbides; chairside grinding; zirconia
• Online Access: http://www.j-ips.org/article.asp?issn=0972-4052;year=2017;volume=17;issue=1;spage=22;epage=28;aulast=Sandhu

Aim: The aim of the present study was to assess the change in physical properties (surface roughness, surface hardness and phase transformation) after surface grinding of zirconia by using three commercially available abrasives. Materials and Methods: Thirty sintered zirconia specimens were prepared and divided into three groups namely Group M (grinded using Mani Dia diamond bur standard grit), Group T (grinded using Tri Hawk diamond bur coarse grit) and Group P (grinded using Predator carbide bur). A customised assembly was used to follow a standardised protocol for surface grinding. The surface roughness, surface hardness and phase transformation was recorded before and after the grinding procedure. Statistical Analysis Used: ANOVA and Bonferroni post hoc test were used to assess the values obtained after the testing the surface roughness and surface hardness. Results: The results of the present study revealed the average values of change in surface roughness as Group M (0.44 μm) and Group T (1.235 μm) and Group P (-0.88 μm). The average values of change in surface hardness were Group T (19.578 HV), Group M (46.722 HV) and Group P (36.429 HV). The change in surface hardness was not statistically significant. There was no phase transformation seen after the grinding procedure. Clinical Significance: Carbide burs along with copious water irrigation when used to grind zirconia intra-orally produces has a polishing effect, minimal change in hardness & no phase transformation. The present study advocates the use of carbides for chair-side grinding of zirconia.