Evaluation of suitability for 3D printing of high performance concretes

Evaluation of suitability for 3D printing of high performance concretes

The article presents overview of additive manufacturing for concrete structures. Study focuses on specific tests used to determine suitability of high performance mixes for 3D printing. The tests include determination of compressive strength and evaluation of printing speed, extrudability and overal...

Full description

Bibliographic Details
Main Authors:	Kaszyńska Maria, Hoffmann Marcin, Skibicki Szymon, Zieliński Adam, Techman Mateusz, Olczyk Norbert, Wróblewski Tomasz
Format:	Article
Language:	English
Published:	EDP Sciences 2018-01-01
Series:	MATEC Web of Conferences
Online Access:	https://doi.org/10.1051/matecconf/201816301002

Similar Items

Maturity testing of 3D printing concrete with inert microfiller
by: Skibicki Szymon, et al.
Published: (2018-01-01)

3D Concrete Printing for Sustainable Construction
by: Maria Kaszyńska, et al.
Published: (2020-12-01)

Automation in the Construction of a 3D-Printed Concrete Wall with the Use of a Lintel Gripper
by: Marcin Hoffmann, et al.
Published: (2020-04-01)

Use of DMDA method for production of heavyweight concrete
by: Techman Mateusz, et al.
Published: (2018-01-01)

Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
by: Karol Federowicz, et al.
Published: (2020-06-01)

Foundation Piles—A New Feature for Concrete 3D Printers
by: Marcin Hoffmann, et al.
Published: (2021-05-01)

Influence of the w/c ratio and aggregate composition on the autogenous shrinkage in self-consolidating concrete
by: Zielinski Adam, et al.
Published: (2018-01-01)

Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing
by: Piotr Olesik, et al.
Published: (2019-08-01)

Comparison of calculation models’ estimates with actual measured autogenous shrinkage in High-Performance Cement Composites
by: Zieliński Adam, et al.
Published: (2018-01-01)

Torsional Stability Assessment of Columns Using Photometry and FEM
by: Krzysztof Wierzbicki, et al.
Published: (2020-09-01)

Calibration of Steel Rings for the Measurement of Strain and Shrinkage Stress for Cement-Based Composites
by: Adam Zieliński, et al.
Published: (2020-07-01)

Modification of Lightweight Aggregate Concretes with Silica Nanoparticles—A Review
by: Karol Federowicz, et al.
Published: (2021-07-01)

Experimental Investigation of Concrete with Recycled Aggregates for Suitability in Concrete Structures
by: Arkadiusz Denisiewicz, et al.
Published: (2019-11-01)

Mechanical Performance and Environmental Assessment of Sustainable Concrete Reinforced with Recycled End-of-Life Tyre Fibres
by: Magdalena Pawelska-Mazur, et al.
Published: (2021-01-01)

Preliminary studies on the suitability of PETG for 4D printing applications
by: Hassan Mohamed H., et al.
Published: (2020-01-01)

3D Printing for Prestressed Concrete
by: Huthman, Ibrahim O.
Published: (2017)

THE SYSTEM FOR COMPLEX MAGNETIC SUSCEPTIBILITY MEASUREMENT OF NANOPARTICLES WITH 3D PRINTED CARCASS FOR INTEGRATED RECEIVE COILS
by: Mateusz Midura, et al.
Published: (2021-03-01)

Performance of 3D printed concrete formworks for bridge pillars focusing on casting
by: Boned Ferrer, Sergi
Published: (2021)

Novel Cold Crucible Ultrasonic Atomization Powder Production Method for 3D Printing
by: Łukasz Żrodowski, et al.
Published: (2021-05-01)

3D Concrete Printing for Structural Applications
by: Freek Bos, et al.
Published: (2019-12-01)

3D Printing of Concrete-Geopolymer Hybrids
by: Bednarz, S., et al.
Published: (2022)

The Suitability of Using 3D PLA Printed Wedges for Ultrasonic Wave Propagation
by: Antonio J. Balvantin, et al.
Published: (2020-01-01)

Experimental and simulated study of 3D-printed couplings’ suitability for industrial application
by: Baladés, N., et al.
Published: (2023)

Corrosion as a cause of the failure of the pipeline steel supporting structure
by: Paczkowski Wiesław, et al.
Published: (2019-01-01)

Transparent Electrodes with Nanotubes and Graphene for Printed Optoelectronic Applications
by: Marcin Słoma, et al.
Published: (2014-01-01)

Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
by: Huang, J., et al.
Published: (2022)

Suitability of recycled concrete aggregate for use in binary cement concrete
by: Ouchagour, Youssef
Published: (2007)

Buildability and Mechanical Properties of 3D Printed Concrete
by: Changbin Joh, et al.
Published: (2020-11-01)

Suitability of the Openly Accessible 3D Printed Prosthetic Hands for War-Wounded Children
by: John-John Cabibihan, et al.
Published: (2021-01-01)

Suitability of 3D printing cranial trauma: Prospective novel applications and limitations of 3D replicas
by: Rachael M. Carew, et al.
Published: (2021-11-01)

Specification of the Properties and Effects of Additives and Admixtures on a Mixture Suitable for 3D Printing of Buildings
by: Fiľarská Diana, et al.
Published: (2020-12-01)

Electric sustainability analysis for concrete 3D printing machine
by: Ramírez Jiménez, Guillermo
Published: (2019)

Adaptive Concrete 3D Printing Based on industrial Robotics
by: Hu, Ruiming
Published: (2021)

Single-Stage Polystyrene Concrete 3D Printing Technology
by: Molodin Victor, et al.
Published: (2020-01-01)

Development of 3D Printed Networks in Self-Healing Concrete
by: Cristina De Nardi, et al.
Published: (2020-03-01)

Rheological Property Criteria for Buildable 3D Printing Concrete
by: Hoseong Jeong, et al.
Published: (2019-02-01)

Numerical simulation of multi-layer 3D concrete printing
by: Jon Spangenberg, et al.
Published: (2021-10-01)

3D environmentally friendly concrete printing model preparation
by: Lazarev Yuriy, et al.
Published: (2020-01-01)

Related-Key Cryptanalysis on the Full PRINTcipher Suitable for IC-Printing
by: Yuseop Lee, et al.
Published: (2014-01-01)

A STUDY OF SUITABILITY OF SCREEN PRINTING ON MEDICAL POLYURETHANE FOAM
by: David Su, et al.
Published: (2007)