Marginal Aaccuracy of Ceromer Crowns and Effect of Relining on the Fitness

Marginal Aaccuracy of Ceromer Crowns and Effect of Relining on the Fitness

Show other versions (1)

Statement of Problem: Targis restorations provide good esthetic and clinical success; however, improving marginal accuracy requires further investigations. Purpose: The aim of this was to study evaluate the effect of relining on the marginal accuracy of ceromer crowns. Material and Methods: One ivor...

Full description

Bibliographic Details
Main Authors:	F. Gerami-Panah, S. Boushehri
Format:	Article
Language:	English
Published:	Tehran University of Medical Sciences 2004-06-01
Series:	Frontiers in Dentistry
Subjects:	Ceromer Marginal gap Marginal opening Fixed Partial denture
Online Access:	https://jdt.tums.ac.ir/index.php/jdt/article/view/20

Similar Items

Marginal Aaccuracy of Ceromer Crowns and Effect of Relining on the Fitness
by: F. Gerami-Panah, et al.
Published: (2004-06-01)

The Effect of Various Finish Line Configurations on the Marginal Seal and Occlusal Discrepancy of Cast Full Crowns After Cementation - An In-vitro Study
by: Vaishali Nemane, et al.
Published: (2015-08-01)

Mechanical and Tribological Characterization of a Dental Ceromer
by: Mariana Santos, et al.
Published: (2020-02-01)

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study
by: Manoj Kumar Yasangi, et al.
Published: (2015-05-01)

A survey on the effects of three surface treatment methods on bond strength between base-metal alloys and Ceromer material (Targis)
by: Rokni. Sh., et al.
Published: (2004-08-01)

(In-Vitro Comparison between Closed Versus Open CAD/CAM Systems) Comparison between Closed and Open CAD/CAM Systems by Evaluating the Marginal Fit of Zirconia-Reinforced Lithium Silicate Ceramic Crowns
by: Gil Ben-Izhack, et al.
Published: (2021-05-01)

Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses
by: Jalil Ghanbarzadeh, et al.
Published: (2015-01-01)

Treatment of Full and Partial Arches with Internal-Conical-Connection Dental Implants: Clinical Results after 5 Years of Follow-Up
by: Diego Lops, et al.
Published: (2020-12-01)

Effects of Different Surface Treatments on the Bond Strength of CAD/CAM Resin Nano Ceramic or Ceromer to Resin Cement
by: Ayse Atay, et al.
Published: (2019-05-01)

Marginal and internal fit of full ceramic crowns milled using CADCAM systems on cadaver full arch scans
by: János Vág, et al.
Published: (2020-07-01)

Effect of Digital Technologies on the Marginal Accuracy of Conventional and Cantilever Co–Cr Posterior-Fixed Partial Dentures Frameworks
by: Celia Tobar, et al.
Published: (2021-03-01)

Zinc phosphate as a definitive cement for implant-supported crowns and fixed dentures
by: Flanagan D
Published: (2017-11-01)

Estabilidade dimensional de uma resina acrílica para coroas provisórias em função de diferentes técnicas de processamento ao longo do tempo
by: David Alejandro García-López, et al.

Audit of Crown and Fixed Partial Denture in a Nigerian Teaching Hospital
by: Abiodun-Solanke Iyabode M Funmilayo, et al.
Published: (2017-12-01)

Evaluating the effect of different combination of impression and pouring materials on marginal and internal adaptation of zirconia crowns.
by: Safoura Ghodsi, et al.
Published: (2020-10-01)

Effect of Thickness of Zirconia Core on Marginal Adaptation of All-Ceramic Restorations
by: Ezatollah Jalalian, et al.
Published: (2014-07-01)

A Simple Chairside Technique of Removing Crown and Fixed Partial Denture Restorations
by: Abhinav Gupta
Published: (2014-03-01)

Influence of application site of provisional cement on the marginal adaptation of provisional crowns
by: Mayra Cardoso, et al.
Published: (2008-06-01)

Effect of Metal Collar on Marginal Distortion of Base Metal Crowns
by: Grami Panah F, et al.
Published: (2000-06-01)

In Vitro Evaluation of the Effect of Core Thickness and Fabrication Stages on the Marginal Accuracy of an All-Ceramic System
by: A. S. Mostafavi, et al.
Published: (2012-01-01)

In vitro evaluation of the effect of core thickness and fabrication stages on the marginal accuracy of an all-ceramic system.
by: F Farid, et al.
Published: (2012-09-01)

Flexural strength and marginal fit of two types of lithium disilicate ceramics for crowns
by: Munguia, Gerardo
Published: (2016)

Knowledge, attitude, and practice of dental professionals regarding the effect and management of food impaction associated with fixed partial denture prostheses: A survey
by: Aradhana Nagarsekar, et al.
Published: (2016-01-01)

Effect of Taper on Stress Distribution of All Ceramic Fixed Partial Dentures: a 3D-FEA Study
by: F. Gerami-Panah, et al.
Published: (2005-09-01)

Effect of Sloped Shoulder and Deep Chamfer Finish Lines on Marginal Adaptation of Zirconia Restorations
by: Ezzat Allah Jalalian, et al.
Published: (2018-01-01)

The evaluation and comparison of marginal adaptation in metal ceramic and all ceramic restorations fabricated by two methods: CAD/CAM and conventional
by: Ahmad Ghahremanloo, et al.
Published: (2018-06-01)

Vertical and horizontal misfit analysis of 3-unit FDP fabricated with different techniques and CAD/CAM systems
by: de Mello, C.C, et al.
Published: (2018)

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study
by: Sujana Ullattuthodi, et al.
Published: (2017-01-01)

Microleakage of Different Self-Adhesive Materials for Lithium Disilicate CAD/CAM Crowns
by: Ella A. Naumova, et al.
Published: (2015-06-01)

Marginal fit of electroformed copings before and after the coction of the porcelain
by: Leonardo Buso, et al.
Published: (2015-11-01)

Comparison of the marginal fit of different types of dental ceramic systems (In-vitro)
by: Gholamreza Esfahanizadeh, et al.
Published: (2018-03-01)

Comparison of the marginal gap of zirconia-fabricated copings generated by CAD/CAM and Copy-Milling methods
by: Abdolhamid Alhavaz, et al.
Published: (2015-01-01)

Increasing Denture Retention using Compound Denture Technique – A Case Report
by: Agam Wirayudha, et al.
Published: (2018-06-01)

The marginal fit of lithium disilicate crowns: Press vs. CAD/CAM
by: Basel Azar, et al.
Published: (2018-01-01)

In vitro evaluation of the marginal fit of different all-ceramic crowns
by: Munir Tolga Yucel, et al.
Published: (2013-09-01)

Correlation between margin fit and microleakage in complete crowns cemented with three luting agents
by: Paulo Henrique Orlato Rossetti, et al.
Published: (2008-02-01)

Effect of total occlusal convergence on fit and fracture resistance of zirconia-reinforced lithium silicate crowns
by: Alammari MR, et al.
Published: (2018-12-01)

Influence of marginal fit and cement types on microleakage of all-ceramic crown systems
by: Ece Yüksel, et al.
Published: (2011-06-01)

In vitro validation of Digital Image Analysis Sequence (DIAS) for the assessment of the marginal fit of cement-retained implant-supported experimental crowns
by: Aristeidis A. Villias, et al.
Published: (2021-02-01)

Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system
by: Ji Suk SHIM, et al.
Published: (2015-10-01)