Polyether Ether Ketone / Carbon Nanotube Composite Fibres

Polyether Ether Ketone / Carbon Nanotube Composite Fibres

Polyether ether ketone (PEEK), a thermoplastic polymer with excellent temperature stability and mechanical properties, is modified with carbon nanotubes (CNT). Then it is processed to fibres to study the influence of CNT on the mechanical properties, the electrical conductivity and the polymer struc...

Full description

Bibliographic Details
Main Authors:	T. Go, D. Pico, W. Steinmann
Format:	Article
Language:	English
Published:	AIDIC Servizi S.r.l. 2017-09-01
Series:	Chemical Engineering Transactions
Online Access:	https://www.cetjournal.it/index.php/cet/article/view/381

Similar Items

Carbon fibre/polyether ether ketone (CF/PEEK) implants in orthopaedic oncology
by: Christoph J. Laux, et al.
Published: (2018-12-01)

Tribological behavior of unfilled and carbon fiber reinforced polyether ether ketone/polyether imide composites
by: Yoo, Jong Hyun
Published: (2014)

Development of Apatite Nuclei Precipitated Carbon Nanotube-Polyether Ether Ketone Composite with Biological and Electrical Properties
by: Chihiro Ishizaki, et al.
Published: (2020-02-01)

The creep behavior of polyether-ether-ketone composite material
by: Chang,Yi-Hwa, et al.
Published: (1993)

In Situ Measurement of Carbon Fibre/Polyether Ether Ketone Thermal Expansion in Low Earth Orbit
by: Farhan Abdullah, et al.
Published: (2020-03-01)

PEEK (Polyether-ether-ketone) and its composite materials in orthopedic implantation
by: Hongyun Ma, et al.
Published: (2021-03-01)

Biological tribology properties of the modified polyether ether ketone composite materials
by: Ning Li, et al.
Published: (2020-09-01)

Research on the Fused Deposition Modeling of Polyether Ether Ketone
by: Ruoxiang Gao, et al.
Published: (2021-07-01)

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes
by: Gwomei Wu, et al.
Published: (2019-07-01)

Biologically Modified Polyether Ether Ketone as Dental Implant Material
by: Zhangyu Ma, et al.
Published: (2020-12-01)

Development and Evaluation of Polyether Ether Ketone (PEEK) Capillary for Electrospray
by: Christian Sögaard, et al.
Published: (2019-01-01)

Composite Sulfonated Polyether-Ether Ketone Membranes with SBA-15 for Electrochemical Energy Systems
by: A. Rico-Zavala, et al.
Published: (2020-03-01)

Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites
by: Honggang Dong, et al.
Published: (2021-03-01)

In Vitro Evaluation of Bioactivity of Chemically Deposited Hydroxyapatite on Polyether Ether Ketone
by: D. Almasi, et al.
Published: (2015-01-01)

Graphene reinforced polyether ether ketone nanocomposites for bone repair applications
by: Nan Jiang, et al.
Published: (2021-08-01)

Deposition of the hydroxyapatite particles on the polyether ether ketone surface for orthopaedic applications
by: Almasi, Davood
Published: (2015)

Investigation of sulfonated polyether ether ketone nanocomposite proton exchange membranes
by: I Cheng Hsu, et al.
Published: (2004)

Enhancement of surface bioactivity on carbon fiber-reinforced polyether ether ketone via graphene modification
by: Yan JH, et al.
Published: (2018-06-01)

Comparison of the bond strength of composite resin to zirconia and composite resin to polyether ether ketone: An in vitro study
by: Hasan Sarfaraz, et al.
Published: (2020-01-01)

Flexural Behavior and Fracture Mechanisms of Short Carbon Fiber Reinforced Polyether-Ether-Ketone Composites at Various Ambient Temperatures
by: Bing Zheng, et al.
Published: (2018-12-01)

Evaluation of the failure modes and load-bearing capacity of different surface-treated polyether ether ketone copings veneered with lithium di-silicate compared to polyether ether ketone copings veneered with composite: An in vitro study
by: Abhishek Kumar Gupta, et al.
Published: (2021-01-01)

Flexural strength of polyether ether ketone high-performance polyether in comparison with base metal alloy and Zirconia ceramic.
by: Negar Barjini, et al.
Published: (2020-02-01)

Understanding the Reinforcement of Graphene in Poly(Ether Ether Ketone)/Carbon Fibre Laminates
by: Araceli Flores, et al.
Published: (2021-07-01)

Study of Drilling Process by Cooling Compressed Air in Reinforced Polyether-Ether-Ketone
by: Rosario Domingo, et al.
Published: (2020-04-01)

The efficacy of polyether‐ether‐ketone wire as a retainer following orthodontic treatment
by: Ammar Salim Kadhum, et al.
Published: (2021-06-01)

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites
by: Dong Yang, et al.
Published: (2021-05-01)

Synthesis, characterization and optimization of sulfonated polyether ether ketone composite membrane for direct methanol fuel cell
by: Othman, Nur Hidayati
Published: (2009)

Carbon Fiber/Polyether Ether Ketone (CF/PEEK) Implants Allow for More Effective Radiation in Long Bones
by: Christoph J. Laux, et al.
Published: (2020-04-01)

Effects of Thermal Cycle and Ultraviolet Radiation on 3D Printed Carbon Fiber/Polyether Ether Ketone Ablator
by: Farhan Abdullah, et al.
Published: (2020-07-01)

Fatigue data for polyether ether ketone (PEEK) under fully-reversed cyclic loading
by: Rakish Shrestha, et al.
Published: (2016-03-01)

Polyether-ether-ketone/poly(methyl methacrylate)/carbon fiber ternary composites prepared by electrospinning and hot pressing for bone implant applications
by: Wenyuan Jia, et al.
Published: (2021-11-01)

Additive Manufacturing of Polyether Ether Ketone (PEEK) for Space Applications: A Nanosat Polymeric Structure
by: Marianna Rinaldi, et al.
Published: (2021-12-01)

Insight Into Osseointegration of Nanohydroxyapatite/Polyamide 66 Based on the Radiolucent Gap: Comparison With Polyether-Ether-Ketone
by: Jianxiao Li, et al.
Published: (2021-06-01)

Fatigue behavior and modeling of polyether ether ketone (PEEK) under constant and variable amplitude loadings
by: Shrestha, Rakish
Published: (2016)

Modification of coconut shells by polyether ether ketone for high-presure adsorption of methane and natural gas
by: Umar Sidik, Hayatu
Published: (2019)

Effects of Raster Angle and Material Components on Mechanical Properties of Polyether-Ether-Ketone/Calcium Silicate Scaffolds
by: Jibao Zheng, et al.
Published: (2021-07-01)

3D printing high interfacial bonding polyether ether ketone components via pyrolysis reactions
by: Qiushi Li, et al.
Published: (2021-01-01)

Selective Grafting of Polyamines to Polyether Ether Ketone Surface during Molding and Its Use for Chemical Plating
by: Jürgen Nagel, et al.
Published: (2018-09-01)

Test of Designing and Manufacturing a Polyether Ether Ketone Endoprosthesis for Canine Extremities by 3D Printing
by: Rosa Mendaza-DeCal, et al.
Published: (2021-08-01)

Melt-Processed Poly(Ether Ether Ketone)/Carbon Nanotubes/Montmorillonite Nanocomposites with Enhanced Mechanical and Thermomechanical Properties
by: Ruixue Ma, et al.
Published: (2019-02-01)

Cannot write session to /tmp/vufind_sessions/sess_060dvknhn52482hmg9rlmr391d