The Influence of Milling and Spark Plasma Sintering on the Microstructure and Properties of the Al7075 Alloy

The Influence of Milling and Spark Plasma Sintering on the Microstructure and Properties of the Al7075 Alloy

The compact samples of an Al7075 alloy were prepared by a combination of gas atomization, high energy milling, and spark plasma sintering. The predominantly cellular morphology observed in gas atomized powder particles was completely changed by mechanical milling. The continuous-like intermetallic p...

Full description

Bibliographic Details
Main Authors:	Orsolya Molnárová, Přemysl Málek, Jozef Veselý, Peter Minárik, František Lukáč, Tomáš Chráska, Pavel Novák, Filip Průša
Format:	Article
Language:	English
Published:	MDPI AG 2018-04-01
Series:	Materials
Subjects:	gas atomized Al7075 alloy mechanical milling spark plasma sintering microstructure microhardness
Online Access:	http://www.mdpi.com/1996-1944/11/4/547

Similar Items

Nanocrystalline Al7075 + 1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering
by: Orsolya Molnárová, et al.
Published: (2017-09-01)

Spark Plasma Sintering of a Gas Atomized Al7075 Alloy: Microstructure and Properties
by: Orsolya Molnárová, et al.
Published: (2016-12-01)

Bimodal Microstructure in an AlZrTi Alloy Prepared by Mechanical Milling and Spark Plasma Sintering
by: Orsolya Molnárová, et al.
Published: (2020-08-01)

Microstructure and Mechanical Properties of Spark Plasma Sintered and Severely Deformed AA7075 Alloy
by: Dariusz Garbiec, et al.
Published: (2021-09-01)

Effect of Short Attritor-Milling of Magnesium Alloy Powder Prior to Spark Plasma Sintering
by: Peter Minárik, et al.
Published: (2020-09-01)

MICROSTRUCTURE AND MICROHARDNESS EVALUATION FOR NiCrAlY MATERIALS MANUFACTURED BY SPARK PLASMA SINTERING AND PLASMA SPRAYING
by: Iosif Hulka, et al.
Published: (2020-06-01)

Microstructure and Mechanical Strength of Attritor-Milled and Spark Plasma Sintered Mg-4Y-3Nd Alloy
by: Mária Zemková, et al.
Published: (2020-07-01)

Structure and Phase Composition of a W-Ta-Mo-Nb-V-Cr-Zr-Ti Alloy Obtained by Ball Milling and Spark Plasma Sintering
by: Ivan A. Ditenberg, et al.
Published: (2020-01-01)

Characterization of mechanically milled and spark plasma sintered Al2124-CNT nanocomposites
by: Saheb N.
Published: (2015-01-01)

Structural Investigations of TiC–Cu Nanocomposites Prepared by Ball Milling and Spark Plasma Sintering
by: Nguyen Thi Hoang ,Oanh, et al.
Published: (2017-04-01)

Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method
by: Sneha Samal, et al.
Published: (2021-02-01)

The Structure and Mechanical Properties of High-Strength Bulk Ultrafine-Grained Cobalt Prepared Using High-Energy Ball Milling in Combination with Spark Plasma Sintering
by: Ivo Marek, et al.
Published: (2016-05-01)

Microstructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles
by: Ismaila Kayode Aliyu, et al.
Published: (2015-01-01)

Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy
by: M.U.F. Khan, et al.
Published: (2020-06-01)

COMPACTION OF LITHIUM-SILICATE CERAMICS USING SPARK PLASMA SINTERING
by: Tomas Frantisek Kubatik, et al.
Published: (2016-12-01)

Data on assessment and exploratory statistical correlation data analysis of sintered Nd:YAG laser welded 2507 duplex stainless steel
by: Ayorinde Tayo Olanipekun, et al.
Published: (2020-10-01)

Microstructure and Mechanical Properties of AA7075 Aluminum Alloy Fabricated by Spark Plasma Sintering (SPS)
by: Elder Soares, et al.
Published: (2021-01-01)

Spark Plasma Co-Sintering of Mechanically Milled Tool Steel and High Speed Steel Powders
by: Massimo Pellizzari, et al.
Published: (2016-06-01)

Characterization of In-Situ Cu–TiH2–C and Cu–Ti–C Nanocomposites Produced by Mechanical Milling and Spark Plasma Sintering
by: Nguyen Thi Hoang Oanh, et al.
Published: (2017-03-01)

Fabrication of the Zirconium Diboride-Reinforced Composites by a Combination of Planetary Ball Milling, Turbula Mixing and Spark Plasma Sintering
by: Iwona Sulima, et al.
Published: (2021-07-01)

Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites
by: Samuel Olukayode Akinwamide, et al.
Published: (2020-11-01)

On the Structural and Chemical Homogeneity of Spark Plasma Sintered Tungsten
by: Jiří Matějíček, et al.
Published: (2019-08-01)

Sintering of mixed Ca–K–Na phosphates: Spark plasma sintering vs flash-sintering
by: N. Orlov, et al.
Published: (2021-03-01)

Sifat Mekanik Produk Metalurgi Serbuk dari Proses Ball Milling dengan Bahan Baku Al7075 Terhadap Variasi Temperatur Sinter dan Tekanan Kompaksi
by: Hizkia Alpha Dewanto, et al.
Published: (2021-07-01)

Synthesis of Vanadium-Vanadium Carbide in-situ nanocomposites by high energy ball milling and spark plasma sintering
by: Krishnan Vinoadh Kumar, et al.
Published: (2016-01-01)

Master Sintering Surface: A practical approach to its construction and utilization for Spark Plasma Sintering prediction
by: Pouchly V., et al.
Published: (2012-01-01)

Reactive Spark Plasma Sintering and Mechanical Properties of Zirconium Diboride–Titanium Diboride Ultrahigh Temperature Ceramic Solid Solutions
by: Karthiselva N. S., et al.
Published: (2016-09-01)

Matrix Structure Evolution and Nanoreinforcement Distribution in Mechanically Milled and Spark Plasma Sintered Al-SiC Nanocomposites
by: Nouari Saheb, et al.
Published: (2014-09-01)

Comparison of Conventional and Flash Spark Plasma Sintering of Cu–Cr Pseudo-Alloys: Kinetics, Structure, Properties
by: Kirill. V. Kuskov, et al.
Published: (2021-01-01)

Properties of FeAlSi-X-Y Alloys (X,Y=Ni, Mo) Prepared by Mechanical Alloying and Spark Plasma Sintering
by: Filip Průša, et al.
Published: (2020-01-01)

Nanocompósitos de Al2O3-SiC sinterizados por "spark plasma sintering" (SPS) Al2O3-SiC nanocomposites sintered by spark plasma sintering
by: V. Trombini, et al.
Published: (2008-09-01)

High-Strength Ultra-Fine-Grained Hypereutectic Al-Si-Fe-X (X = Cr, Mn) Alloys Prepared by Short-Term Mechanical Alloying and Spark Plasma Sintering
by: Filip Průša, et al.
Published: (2016-11-01)

Spark plasma sintering of alumina/yttria‐doped silicon carbide
by: Antonio Popolizio, et al.
Published: (2020-03-01)

Spray freeze granulation of submicron alumina and its sintering behavior via spark plasma sintering
by: Liu Wei, et al.
Published: (2015-01-01)

Évolution des microstructures et mécanismes de densification d'un alliage TiAl lors du frittage par Spark Plasma Sintering
by: Guyon, Julien
Published: (2015)

Flash spark plasma sintering of pure TiB2
by: Simone Failla, et al.
Published: (2021-03-01)

Spark plasma sintering of Si3N4/multilayer graphene composites
by: Bódis Eszter, et al.
Published: (2014-12-01)

Spark plasma sintering : couplage entre les approches : modélisation, instrumentation et matériaux
by: Manière, Charles
Published: (2015)

Colossal relative permittivity and low dielectric loss in BaFe0.5Nb0.5O3 ceramics prepared by spark plasma sintering
by: H. Mahfoz Kotb, et al.
Published: (2020-12-01)

Mechanical Milling-Assisted Spark Plasma Sintering of Fine-Grained W-Ni-Mn Alloy
by: Yanlin Pan, et al.
Published: (2018-07-01)

Cannot write session to /tmp/vufind_sessions/sess_ug54q5giumqg73st082vk2otsa