Miniaturised Rod-Shaped Polymer Structures with Wire or Fibre Reinforcement—Manufacturing and Testing

Miniaturised Rod-Shaped Polymer Structures with Wire or Fibre Reinforcement—Manufacturing and Testing

Rod-shaped polymer-based composite structures are applied to a wide range of applications in the process engineering, automotive, aviation, aerospace and marine industries. Therefore, the adequate knowledge of manufacturing methods is essential, covering the fabrication of small amounts of specimens...

Full description

Bibliographic Details
Main Authors:	Michael Kucher, Martin Dannemann, Ansgar Heide, Anja Winkler, Niels Modler
Format:	Article
Language:	English
Published:	MDPI AG 2020-06-01
Series:	Journal of Composites Science
Subjects:	composite profile fibre reinforced thermoplastic polyamide (PA) polyether ether ketone (PEEK) polytetrafluoroethylene (PTFE) shrink tube consolidation
Online Access:	https://www.mdpi.com/2504-477X/4/3/84

Similar Items

Graphene reinforced polyether ether ketone nanocomposites for bone repair applications
by: Nan Jiang, et al.
Published: (2021-08-01)

Effects of Endodontic Irrigants on Material and Surface Properties of Biocompatible Thermoplastics
by: Michael Kucher, et al.
Published: (2019-03-01)

Additive Manufacturing of Polyether Ether Ketone (PEEK) for Space Applications: A Nanosat Polymeric Structure
by: Marianna Rinaldi, et al.
Published: (2021-12-01)

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
by: Wenzheng Wu, et al.
Published: (2015-09-01)

Electrical resistance of CNT-PEEK composites under compression at different temperatures
by: Mohiuddin Mohammad, et al.
Published: (2011-01-01)

Evaluation of the failure modes and load-bearing capacity of different surface-treated polyether ether ketone copings veneered with lithium di-silicate compared to polyether ether ketone copings veneered with composite: An in vitro study
by: Abhishek Kumar Gupta, et al.
Published: (2021-01-01)

Carbon fibre/polyether ether ketone (CF/PEEK) implants in orthopaedic oncology
by: Christoph J. Laux, et al.
Published: (2018-12-01)

Selective Grafting of Polyamines to Polyether Ether Ketone Surface during Molding and Its Use for Chemical Plating
by: Jürgen Nagel, et al.
Published: (2018-09-01)

A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material
by: Aditya Ramgobin, et al.
Published: (2020-08-01)

Research on the Fused Deposition Modeling of Polyether Ether Ketone
by: Ruoxiang Gao, et al.
Published: (2021-07-01)

Nanosized Hydroxyapatite Coating on PEEK Implants Enhances Early Bone Formation: A Histological and Three-Dimensional Investigation in Rabbit Bone
by: Pär Johansson, et al.
Published: (2015-06-01)

Morphology, proliferation and osteogenic differentiation of human dental pulp derived stem cells cultured on collagen coated and non-coated polyether ether ketone (PEEK) and porous tantalum: an in vitro comparative study
by: Sina Farzaneh, et al.
Published: (2018-12-01)

Characterization of quartz lamp emitters for high temperature polymer selective laser sintering (SLS) applications
by: Kubiak, Steven Thomas
Published: (2015)

Safety assessment of the substance 2,4,4′‐trifluorobenzophenone, for use in food contact materials
by: EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF)
Published: (2016-07-01)

An Investigation of the Microstructure and Properties of a Cryogenically Mechanically Alloyed Polycarbonate-Poly(Ether Ether Ketone) System
by: Martin, Julie Patricia
Published: (2014)

Preliminary Study of the Use of Sulphonated Polyether Ether Ketone (SPEEK) as Proton Exchange Membrane for Microbial Fuel Cell (MFC)
by: Dani Permana, et al.
Published: (2018-02-01)

Polyether ether ketone implants achieve increased bone fusion when coated with nano-sized hydroxyapatite: a histomorphometric study in rabbit bone
by: Johansson P, et al.
Published: (2016-04-01)

Synthesis and Process Optimization of Electrospun PEEK-Sulfonated Nanofibers by Response Surface Methodology
by: Carlo Boaretti, et al.
Published: (2015-07-01)

A Numerical Analysis of the Temporal and Spatial Temperature Development during the Ultrasonic Spot Welding of Fibre-Reinforced Thermoplastics
by: Shahan Tutunjian, et al.
Published: (2020-04-01)

In vitro osteogenesis of rat bone marrow mesenchymal cells on PEEK disks with heat-fixed apatite by CO2 laser bonding
by: Sachiko Kawasaki, et al.
Published: (2020-10-01)

Co-consolidation of CF/PEEK tape-preforms and CF/PEEK organo sheets to manufacture reinforcements in stamp-forming process
by: Julian Weber, et al.
Published: (2019-10-01)

The Role of Digital Devices in Dentistry: Clinical Trends and Scientific Evidences
by: Gianrico Spagnuolo, et al.
Published: (2020-06-01)

Comparison of the bond strength of composite resin to zirconia and composite resin to polyether ether ketone: An in vitro study
by: Hasan Sarfaraz, et al.
Published: (2020-01-01)

In Situ Measurement of Carbon Fibre/Polyether Ether Ketone Thermal Expansion in Low Earth Orbit
by: Farhan Abdullah, et al.
Published: (2020-03-01)

Cold Gas Dynamic Spray Additive Manufacturing of Moisture-Electric Energy Transformation Devices
by: Daoud, Amir
Published: (2020)

Evaluation of the Grafting Efficacy of Active Biomolecules of Phosphatidylcholine and Type I Collagen on Polyether Ether Ketone: In Vitro and In Vivo
by: Jian-Chih Chen, et al.
Published: (2021-06-01)

Strategies to Reduce Biofilm Formation in PEEK Materials Applied to Implant Dentistry—A Comprehensive Review
by: Renata Scheeren Brum, et al.
Published: (2020-09-01)

Comparing different bar materials for mandibular implant-supported overdenture: Finite-element analysis
by: Mohamed I El-Anwar, et al.
Published: (2019-01-01)

Enhancement of surface bioactivity on carbon fiber-reinforced polyether ether ketone via graphene modification
by: Yan JH, et al.
Published: (2018-06-01)

Polyether-ether-ketone/poly(methyl methacrylate)/carbon fiber ternary composites prepared by electrospinning and hot pressing for bone implant applications
by: Wenyuan Jia, et al.
Published: (2021-11-01)

Influence of Alternative and Conventional Surface Treatments on the Bonding Mechanism between PEEK and Veneering Resin for Dental Application
by: Regina F. Villefort, et al.
Published: (2021-06-01)

Fabrication and Characterization of Flexible Capacitive Humidity Sensors Based on Graphene Oxide on Porous PTFE Substrates
by: Zhenyu Wei, et al.
Published: (2021-07-01)

In vivo delamination of coronary guidewire polytetrafluoroethylene layer – A dreaded complication
by: Anshul Kumar Gupta
Published: (2016-03-01)

Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing
by: Maciej Mrówka, et al.
Published: (2021-05-01)

Biologically Modified Polyether Ether Ketone as Dental Implant Material
by: Zhangyu Ma, et al.
Published: (2020-12-01)

Three‐dimensional printed polyether‐ether‐ketone implant for extensive chest wall reconstruction: A case report
by: Lei Wang, et al.
Published: (2020-09-01)

Three-Dimensionally-Printed Polyether-Ether-Ketone Implant with a Cross-Linked Structure and Acid-Etched Microporous Surface Promotes Integration with Soft Tissue
by: Xiaoke Feng, et al.
Published: (2019-08-01)

Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
by: Xiaohu Deng, et al.
Published: (2018-01-01)

Morphology-Property Relationships in Semicrystalline Aerogels of Poly(ether ether ketone)
by: Talley, Samantha J.
Published: (2018)

Comparative evaluation of the wear resistance of two different implant abutment materials after cyclic loading – An in vitro study
by: Maniamuthu Ragupathi, et al.
Published: (2020-01-01)