THE INFLUENCE OF GRAVITY COEFFICIENT ON THE STRUCTURE OF CENTRIFUGAL CASTINGS SILUMINA AK18

THE INFLUENCE OF GRAVITY COEFFICIENT ON THE STRUCTURE OF CENTRIFUGAL CASTINGS SILUMINA AK18

Influence of the gravity coefficient value on structure and extent of allowance zone on machining of castings with diameter of 135 mm from AK18 alloy is investigated. It is established that optimum value of gravity coefficient makes 120–140.

Bibliographic Details
Main Authors:	V. Yu. Stecenko, K. N. Baranov, V. V. Novikov
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2013-09-01
Series:	Litʹë i Metallurgiâ
Online Access:	https://lim.bntu.by/jour/article/view/172

Similar Items

THE INFLUENCE OF THE INGOT MOLD COOLING ON THE STRUCTURE OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING
by: V. Yu. Stecenko, et al.
Published: (2013-09-01)

COOLING METHOD OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING
by: V. Yu. Stecenko, et al.
Published: (2013-09-01)

VERTICAL CENTRIFUGAL CASTING OF A HYPEREUTECTIC SILUMIN WITH COOLING OF THE MOLD AND CASTING
by: E. I. Marukovich, et al.
Published: (2017-07-01)

CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 18
by: V. Ju. Stetsenko, et al.
Published: (2009-08-01)

INVESTIGATION OF HOLLOW SLUGS OF SILUMIN AK18 BY MEANS OF FROSTING ON WATER-COOLED ROD
by: E. I. Marukovich, et al.
Published: (2011-09-01)

INFLUENCE OF STRUCTURAL DISPERSION AND COPPER CONTENTS ON FRICTION DURABILITY OF EUTECTIC ANTIFRICTION SILUMIN AK 15
by: V. Ju. Stetsenko, et al.
Published: (2010-08-01)

Structure, physical and mechanical properties of bronze castings obtained by continuous and centrifugal casting
by: E. I. Marukovich, et al.
Published: (2020-06-01)

CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN
by: V. Ju. Stetsenko, et al.
Published: (2010-09-01)

INFLUENCE OF THERMAL AND HYDRODYNAMIC PARAMETERS OF CASTING ON CHARACTERISTICS OF THE INGOTS, PRODUCED BY FROSTING ON WATER-COOLED BAR
by: V. Ju. Stetsenko, et al.
Published: (2011-09-01)

Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds
by: McKenna, Nicholas
Published: (2011)

FEATURES OF EQUIPMENT FOR CENTRIFUGAL CASTING AND TECHNOLOGY OF OBTAINING BLANKS
by: D. V. Zanko, et al.
Published: (2012-09-01)

DETERMINATION OF RATIONAL COMPOSITION AND CONCENTRATION OF SUPERFINE ALUMINIUM MODIFIER FOR MODIFYING OF THE ALLOY AK18 STRUCTURE
by: V. Ju. Stetsenko, et al.
Published: (2010-09-01)

Effect of centrifugal counter-gravity casting on solidification microstructure and mechanical properties of A357 aluminum alloy
by: Li Xinlei, et al.
Published: (2014-01-01)

A Statistical Evaluation of the Influence of Different Material and Process Parameters on the Heat Transfer Coefficient in Gravity Die Casting
by: Nino Wolff, et al.
Published: (2020-10-01)

CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 12
by: V. Ju. Stetsenko, et al.
Published: (2009-08-01)

NEW DEVELOPMENTS OF GAG «BELNIILIT» IN THE FIELD OF CENTRIFUGAL CASTING
by: D. A. Volkov, et al.
Published: (2009-08-01)

NEW DEVELOPMENTS OF OAO «BELNIILIT» IN THE FIELD OF CENTRIFUGAL CASTING
by: D. A. Volkov, et al.
Published: (2011-11-01)

Development of technology of centrifugal electroslag casting
by: A. G. Janishevskaja
Published: (2002-08-01)

Numerical modelling of centrifugal casting process
by: Yin, Jun
Published: (2016)

Composite centrifugal castings after remelting
by: M. Łągiewka, et al.
Published: (2021-01-01)

Centrifugal Casting of Microfluidic Components With PDMS
by: Mazzeo, Aaron D, et al.
Published: (2018)

Centrifuges for microgravity simulation. The Reduced Gravity Paradigm.
by: Jack J.W.A. van Loon, et al.
Published: (2016-07-01)

Solidified structure of thin-walled titanium parts by vertical centrifugal casting
by: Wu Shiping, et al.
Published: (2011-05-01)

Structural investigation of 70Cu/30Fe based cast alloy obtained by combined use of centrifugal casting-SHS process and forging
by: Sanin Vitalii V., et al.
Published: (2017-01-01)

A Centering Technique for Cast-Iron Moulds in Horizontal Centrifugal Casting
by: Leopold Hrabovský, et al.
Published: (2021-03-01)

The Implementation of an On-line Centrifugal Casting Process Monitoring
by: S. Feng, et al.
Published: (2017-10-01)

Effect of processing factors on the characteristics of centrifugal casting
by: Mohapatra Shubhashree, et al.
Published: (2020-01-01)

Solidification microstructure of centrifugally cast Inconel 625
by: Silvia Barella, et al.
Published: (2017-07-01)

Centrifugal casting of an Al-TiBâ‚‚ composite
by: Forster, Matilda Faith
Published: (2003)

The Process and Properties of Centrifugal Casting Gray Iron
by: Chuo, Meng-Ru, et al.
Published: (1998)

Centrifugal Casting of Paraffin and Beeswax for Hybrid Rockets
by: Stober, Keith J, et al.
Published: (2021)

Centrifugal Casting of Paraffin and Beeswax for Hybrid Rockets
by: Stober, Keith J, et al.
Published: (2022)

Study of the Processes of Shaping the Hollow Billets from Antifriction Alloys by the Centrifugal and Continuous Casting Methods
by: O. M. Khoroshylov, V. V. Kurylyak, O. S. Podolyak, N. S. Antonenko
Published: (2019-09-01)

Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
by: R. C. T. Bertotto, et al.

Influence of the empirical coefficients of cavitation model on predicting cavitating flow in the centrifugal pump
by: Hou-lin Liu, et al.
Published: (2014-03-01)

Influence of the empirical coefficients of cavitation model on predicting cavitating flow in the centrifugal pump
by: Liu Hou-lin, et al.
Published: (2014-03-01)

A Study of the Solidification Structure of the Hypereutectic Al-Si Centrifugal Casting Pipe
by: Z.S.Tsai, et al.
Published: (1999)

Artificial gravity : neurovestibular adaptation to incremental exposure to centrifugation
by: Bruni, Sylvain, 1981-
Published: (2005)

The Shrinkage in Aluminum Gravity Castings
by: Wang Shin-Wei, et al.
Published: (2012)

Evolution of microstructure in centrifugal cast Al-Cu alloy
by: Sui Yanwei, et al.
Published: (2010-02-01)