A Comparative Study between Frequency-Modulated Continous Wave LADAR and Linear LiDAR
Topographic Light Detection and Ranging (LiDAR) technology has advanced greatly in the past decade. Pulse repetition rates of terrestrial and airborne systems havemultiplied thus vastly increasing data acquisition rates. Geiger-mode and FLASH LiDAR have also become far more mature technologies. Howe...
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Copernicus Publications
2014-11-01
|
Series: | The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences |
Online Access: | http://www.int-arch-photogramm-remote-sens-spatial-inf-sci.net/XL-1/233/2014/isprsarchives-XL-1-233-2014.pdf |
Summary: | Topographic Light Detection and Ranging (LiDAR) technology has advanced greatly in the past decade. Pulse repetition rates of
terrestrial and airborne systems havemultiplied thus vastly increasing data acquisition rates. Geiger-mode and FLASH LiDAR have also
become far more mature technologies. However, a new and relatively unknown technology is maturing rapidly: Frequency-Modulated
Continuous Wave Laser Detection and Ranging (FMCW-LADAR). Possessing attributes more akin to modern radar systems, FMCWLADAR
has the ability to more finely resolve objects separated by very small ranges. For tactical military applications (as described
here), this can be a real advantage over single frequency, direct-detect systems. In fact, FMCW-LADAR can range resolve objects
at 10<sup>−7</sup> to 10<sup>−6</sup> meter scales. FMCW-LADAR can also detect objects at greater range with less power. In this study, a FMCWLADAR
instrument and traditional LiDAR instrument are compared. The co-located terrestrial scanning instruments were set up to
perform simultaneous 3-D measurements of the given scene. Several targets were placed in the scene to expose the difference in the
range resolution capabilities of the two instruments. The scans were performed at or nearly the same horizontal and vertical angular
resolutions. It is demonstrated that the FMCW-LADAR surpasses the perfomance of the linear mode LiDAR scanner in terms of range
resolution. Some results showing the maximum range acquisition are discussed but this was not studied in detail as the scanners’ laser
powers differed by a small amount. Applications and implications of this technology are also discussed. |
---|---|
ISSN: | 1682-1750 2194-9034 |