Optimization of technical solutions for pilot hole drilling in soil

Optimization of technical solutions for pilot hole drilling in soil

The paper discusses approaches to improvement of equipment for borehole drilling with a predetermined trajectory in construction of underground utility systems and facilities. Piercing method allows implementing dry drilling of boreholes with small diameter using simple technical equipment. The meth...

Full description

Bibliographic Details
Main Authors:	Danilov Boris, Smolyanitskiy Boris
Format:	Article
Language:	English
Published:	EDP Sciences 2018-01-01
Series:	MATEC Web of Conferences
Online Access:	https://doi.org/10.1051/matecconf/201821603008

Similar Items

Analysis Of Drilling Of A Metal Plate With Pilot Hole
by: Kim K.S.
Published: (2015-06-01)

The Optimization of Deep Hole Quality for Gun Drilling
by: Tsung-Hsien Hung, et al.
Published: (2006)

A Study To Determine Necessity of Pilot Holes When Drilling Shallow Gas Zones Using Top Hole Dual Gradient Drilling Technology
by: King, Lauren
Published: (2010)

The study of drilling mechanics of deep hole drill
by: Chen, Huang-Jin, et al.

Investigation on the Effect of Drill Geometry and Pilot Holes on Thrust Force and Burr Height When Drilling an Aluminium/PE Sandwich Material
by: Bruna Aparecida Rezende, et al.
Published: (2016-09-01)

Optimization of surface roughness in deep hole drilling using moth-flame optimization
by: Kamaruzaman, Anis Farhan, et al.
Published: (2019)

Modified hole-drilling drilling method for the determination of residual stresses
by: Huang, Yu-Lin, et al.
Published: (1986)

The contours of the drilling hole in pulsed laser drilling with inclination angles
by: Guan-ZhongYao, et al.
Published: (2010)

Geometric Optimization of Drills Used to Repair Holes in Magnesium Aeronautical Components
by: Fernando Berzosa, et al.
Published: (2020-11-01)

TECHNICAL WELL DRILLING FOR SECURING OF WET SOILS BY THE METHOD OF JET CEMENTATION
by: I G Shelkovnikov, et al.
Published: (2013-03-01)

Spontaneous Polarization Studies in Drill Holes.
by: Becker, Alex.
Published: (1961)

Drilling process and hole quality relationship
by: Poustie, Ashley Scott
Published: (2012)

RESEARCH OF POWER IMPULSES TRANSFER THROUGH THREADED CONNECTIONS OF THE DRILL-STRING DURING ROTARY-PERCUSSION DRILLING OF PILOT HOLES FOR TRENCHLESS PIPELINE LAYING
by: Lev A. Saruev, et al.
Published: (2020-12-01)

Monitoring of Drill System Behavior for Water-Powered In-The-Hole (ITH) Drilling
by: Rajib Ghosh, et al.
Published: (2017-07-01)

Optimization of roundness error in deep hole drilling using cuckoo search algorithm
by: Mohamad, Azizah, et al.
Published: (2019)

Optimizing the economic efficiency by micro-drill life improvement during deep-hole drilling in the 212-Valve manufacturing process
by: Zhuang, Yan, M. Eng. Massachusetts Institute of Technology
Published: (2014)

Technical parameters of modified seed drill for sowing grain crops in heavy soils
by: Imad. . Antypas, et al.
Published: (2015-09-01)

Pilot tests of microbe-soil combined treatment of waste drilling sludge
by: Lirong Chen, et al.
Published: (2015-03-01)

Experimental investigations on drilling force and drilled hole quality by using twist drill and end mill cutters
by: Wun-Jhung Shih, et al.
Published: (2011)

An assessment of the drilling process employed by the hole-drilling method for residual stress measurements
by: Tamura, Mariana Tiemi
Published: (2016)

Investigating the Drilling Distortion in Deep-Hole Drilling Using Finite Element Method
by: Shou-Der Sheu, et al.
Published: (2002)

Tool stability analysis for deep hole drilling
by: Gorbatyuk Sergey, et al.
Published: (2018-01-01)

Twenty Years of Drilling the Deepest Hole in Ice
by: N. I. Vasiliev, et al.
Published: (2011-03-01)

Twenty Years of Drilling the Deepest Hole in Ice
by: Pavel G. Talalay, et al.
Published: (2011-03-01)

The viability of slim-hole drilling onshore Trinidad
by: Raffie Hosein, et al.
Published: (2018-09-01)

Measurement of structural stresses using hole drilling
by: Harrington, Joshua S.
Published: (2015)

To the problem of literal symbolization of hole drilling parameters
by: L. D. Bazanov
Published: (2015-04-01)

Development and application of the deep hole drilling method
by: Ficquet, Xavier
Published: (2007)

The shaft behavior of deep hole drilling tool
by: XIE, QI-DI, et al.
Published: (1992)

The shaft behavior of deep hole drilling tool
by: Xie, Qi-Di, et al.

The Study of the hole accuracy of micro-drilling processes
by: chan-chon Lin, et al.
Published: (2008)

The Analysis Of Accuracy Compensation For Deep Hole Drilling
by: Kuan Jen Chen, et al.
Published: (2009)

Use of a Pre-Drilled Hole for Implementing Thermal Needle Probe Method for Soils and Rocks
by: So-Jung Lee, et al.
Published: (2016-10-01)

Process optimization of EDM hole-drilling strain-gage method for the residual stress measurement
by: Chuan Liu, et al.
Published: (2008)

Optimizing Burr Hole Placement for Craniotomy: A Technical Note
by: Survendra Kumar Rajdeo Rai, et al.
Published: (2019-07-01)

Drilling process evaluation by predicting drilled hole quality and drill bit wear with on-line acoustic emission signals
by: Wang, Kuang-Jen, 1962-
Published: (2012)

Modeling and Distribution Laws of Drilling Force for Staggered Teeth BTA Deep Hole Drill
by: Xubo Li, et al.
Published: (2018-01-01)

Application of Siamese Networks to the Recognition of the Drill Wear State Based on Images of Drilled Holes
by: Jarosław Kurek, et al.
Published: (2020-12-01)

Study of the mask orientation and drilling-hole shaping in diode laser drilling with the projection method
by: Wen-QiZhao, et al.
Published: (2012)

The drilling performance and hole quality of multilayer diamond-like carbon deposited on micro-drill
by: Ming-Shan Chen, et al.
Published: (2013)