Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide
In this study, the methanolysis process of sunflower oil was investigated to get high methyl esters (biodiesel) content using sodium methoxide. To reach to the best process conditions, central composite design (CCD) through response surface methodology (RSM) was employed. The optimal conditions pred...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Hindawi Limited
2012-01-01
|
Series: | The Scientific World Journal |
Online Access: | http://dx.doi.org/10.1100/2012/475027 |
id |
doaj-3f885423a8474d22a24b3d2c2830e803 |
---|---|
record_format |
Article |
spelling |
doaj-3f885423a8474d22a24b3d2c2830e8032020-11-25T00:16:48ZengHindawi LimitedThe Scientific World Journal1537-744X2012-01-01201210.1100/2012/475027475027Optimization of Sunflower Oil Transesterification Process Using Sodium MethoxideSara KoohiKamali0Chin Ping Tan1Tau Chuan Ling2Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, MalaysiaDepartment of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 Serdang, Selangor, MalaysiaInstitute of Biological Sciences, Faculty of Science, University of Malaya, 50603 Kuala Lumpur, MalaysiaIn this study, the methanolysis process of sunflower oil was investigated to get high methyl esters (biodiesel) content using sodium methoxide. To reach to the best process conditions, central composite design (CCD) through response surface methodology (RSM) was employed. The optimal conditions predicted were the reaction time of 60 min, an excess stoichiometric amount of alcohol to oil ratio of 25%w/w and the catalyst content of 0.5%w/w, which lead to the highest methyl ester content (100%w/w). The methyl ester content of the mixture from gas chromatography analysis (GC) was compared to that of optimum point. Results, confirmed that there was no significant difference between the fatty acid methyl ester content of sunflower oil produced under the optimized condition and the experimental value (P≥0.05). Furthermore, some fuel specifications of the resultant biodiesel were tested according to American standards for testing of materials (ASTM) methods. The outcome showed that the methyl ester mixture produced from the optimized condition met nearly most of the important biodiesel specifications recommended in ASTM D 6751 requirements. Thus, the sunflower oil methyl esters resulted from this study could be a suitable alternative for petrol diesels.http://dx.doi.org/10.1100/2012/475027 |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Sara KoohiKamali Chin Ping Tan Tau Chuan Ling |
spellingShingle |
Sara KoohiKamali Chin Ping Tan Tau Chuan Ling Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide The Scientific World Journal |
author_facet |
Sara KoohiKamali Chin Ping Tan Tau Chuan Ling |
author_sort |
Sara KoohiKamali |
title |
Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide |
title_short |
Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide |
title_full |
Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide |
title_fullStr |
Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide |
title_full_unstemmed |
Optimization of Sunflower Oil Transesterification Process Using Sodium Methoxide |
title_sort |
optimization of sunflower oil transesterification process using sodium methoxide |
publisher |
Hindawi Limited |
series |
The Scientific World Journal |
issn |
1537-744X |
publishDate |
2012-01-01 |
description |
In this study, the methanolysis process of sunflower oil was investigated to get high methyl esters (biodiesel) content using sodium methoxide. To reach to the best process conditions, central composite design (CCD) through response surface methodology (RSM) was employed. The optimal conditions predicted were the reaction time of 60 min, an excess stoichiometric amount of alcohol to oil ratio of 25%w/w and the catalyst content of 0.5%w/w, which lead to the highest methyl ester content (100%w/w). The methyl ester content of the mixture from gas chromatography analysis (GC) was compared to that of optimum point. Results, confirmed that there was no significant difference between the fatty acid methyl ester content of sunflower oil produced under the optimized condition and the experimental value (P≥0.05). Furthermore, some fuel specifications of the resultant biodiesel were tested according to American standards for testing of materials (ASTM) methods. The outcome showed that the methyl ester mixture produced from the optimized condition met nearly most of the important biodiesel specifications recommended in ASTM D 6751 requirements. Thus, the sunflower oil methyl esters resulted from this study could be a suitable alternative for petrol diesels. |
url |
http://dx.doi.org/10.1100/2012/475027 |
work_keys_str_mv |
AT sarakoohikamali optimizationofsunfloweroiltransesterificationprocessusingsodiummethoxide AT chinpingtan optimizationofsunfloweroiltransesterificationprocessusingsodiummethoxide AT tauchuanling optimizationofsunfloweroiltransesterificationprocessusingsodiummethoxide |
_version_ |
1725382567995113472 |