Hydraulic Circuit of Mechanical Pruner Drive for Hops on Low Trellises

• Main Authors: Hoffmann David, Heřmánek P., Rybka A., Jošt B.
• Format: Article
• Language: English
• Published: Sciendo 2015-09-01
• Series: Scientia Agriculturae Bohemica
• Subjects: hops; mechanical pruner; low trellis
• Online Access: https://doi.org/10.1515/sab-2015-0023

A mechanical pruner serves for pruning new hopvine shoots in spring. The later yield depends on the right timing and quality of pruning. That is why hop pruning is one of the most important agrotechnical procedures. A double-disc mechanical pruner used on high trellises cannot be used on low trellises due to its large size. Abroad, for pruning hops on low trellises a specially adapted sprinkler is used (chemical pruning). With regard to the effort to minimize the chemical environmental burden, we opted for the design of the mechanical pruner. Firstly, the low trellis, mechanical pruner, and also elements used in the design of hydraulic circuit are described. Next part of the paper is devoted to the input requirements for both the hydraulic circuit and the mechanical pruner designs. Then a description of an adapted inter-axle carrier used for the experimental model of the hop mechanical pruner and of the effected field measurement follows, along with interpretation of the measured data. These data are depicted in clearly arranged graphs showing the dependency of pressure and hydraulic oil flow on the cutting disc rotational frequency.