Numerical investigation of degas performance on impeller of medium-consistency pump

• Main Authors: Hong Li, Daoxing Ye, Chenhai Zou, Zhikuan Xue
• Format: Article
• Language: English
• Published: SAGE Publishing 2015-12-01
• Series: Advances in Mechanical Engineering
• Online Access: https://doi.org/10.1177/1687814015620322

Medium-consistency technology is known as the process with high efficiency and low pollution. The gas distribution was simulated in the medium-consistency pump with different degas hole positions. Rheological behaviors of pulp suspension were obtained by experimental test. A modified Herschel–Bulkley model and the Eulerian gas–liquid two-phase flow model were utilized to approximately represent the behaviors of the medium-consistency pulp suspension. The results show that when the relative position is 0.53, the gas volume ratio is less than 0.1% at the pump outlet and 9.8% at the vacuum inlet, and the pump head is at the maximum. Because of the different numbers of the impeller blades and turbulence blades and the asymmetric volute structure, the gas is distributed unevenly in the impeller. In addition, the pump performance was tested in experiment and the results are used to validate computational fluid dynamics outcomes.