| Summary: | Landing gear system of an aircraft enables it to take off and land with safety and comfort. Because of the horizontal and vertical velocity of aircraft, upon landing, the complete aircraft undergoes different forcing functions in the form of the impact force that is absorbed by landing gears, shock absorbers, and actuators. In this research, a selection methodology has been proposed for an electrical actuator to be installed in the retraction mechanism of nose landing gear of an aircraft having 1600 kg gross takeoff weight. Nose landing gear and its associated components, like strut and shock absorbers, were modeled in CAD software. Analytical expressions were then developed in order to calculate the actuator stroke, translational velocity, force, and power for complete cycle of retraction, and some were subsequently compared with the computational results that were obtained using MSC ADAMS<inline-formula><math display="inline"><semantics><msup><mrow></mrow><mo>®</mo></msup></semantics></math></inline-formula>. Air in the oleo-pneumatic shock absorber of nose landing gear was modeled as a nonlinear spring with equivalent spring constant, whereas hydraulic oil was modeled as a nonlinear damper with equivalent damping constant. The nose landing gear system was modeled as a mass-spring-damper system for which a solution for sinusoidal forcing functions is proposed. Finally, an electrical actuator has been selected, which can retract and extend nose landing gear, meeting all of the constraints of aircraft, like fuselage space, aircraft ground clearance, locking loads, power consumption, retraction and extension time, and dynamic response of aircraft. It was found that the selection of an electrical actuator is based upon the quantification of forces transmitted to electrical actuator during one point load at gross takeoff weight. The ability of retraction and extension time, as dictated by Federal Aviation Regulation, has also been given due consideration in the proposed methodology as significant criteria. The proposed system is now in the process of ground testing, followed by flight testing in the near future.
|
|---|
