INVESTIGATION OF CHEMICAL COMPOSITION HETEROGENEITY OF MULTICOMPONENT BRASSES AT HIGH-SPEED HARDENING OF THE MELT .

INVESTIGATION OF CHEMICAL COMPOSITION HETEROGENEITY OF MULTICOMPONENT BRASSES AT HIGH-SPEED HARDENING OF THE MELT .

Investigation of heterogeneity of chemical lcomposition in cast and rapid-quenched alloys of system Cu-Zn-Ni-FeP-Pb-Sn is carried out

Bibliographic Details
Main Authors:	M. V. Vereshchagin, I. V. Agunovich
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2010-11-01
Series:	Litʹë i Metallurgiâ
Online Access:	https://lim.bntu.by/jour/article/view/780

Similar Items

INVESTIGATION OF GRAIN STRUCTURE OF MULTICOMPONENT BRASSES
by: M. N. Vereshchagin, et al.
Published: (2010-11-01)

INVESTIGATION OF THE PROCESSES OF STRUCTUREAND PHASE FORMATION OF BLEND POWDERS ON THE BASIS OF WASTE OF HARD TUNGSTEN-CONTAINING ALLOYS AT THEIR MECHANO-SYNTHESIS AND HIGH-SPEED MECHANICAL DISPERSING FOR PRODUCTION OF POWDER COMPOSITIONS
by: M. N. Vereshchagin, et al.
Published: (2012-02-01)

Effect of composition on the hardening ability of multicomponent alloys
by: Jyun-Syoung Jhuang, et al.
Published: (2018)

Development of age hardenable multicomponent alloys
by: Shou-Yong Huang, et al.
Published: (2018)

MODELING OF THE MELT HARDENING WITH INITIAL OVERHEATING OF METAL
by: V. L. Timoshpolskij, et al.
Published: (2006-02-01)

CONTROL OF CHEMICAL COMPOSITION OF CASTING BRASS IN INGOTS USED FOR MANUFACTURE OF STOP VALVES
by: A. A. Pivovarchyk, et al.
Published: (2017-10-01)

REDUCTION OF TEMPERATURE OF MELTING OF THE DIFFUSIVE HIGH-HARDENED ALLOYS FOR INDUCTION SURFACING
by: V. G. Scherbakov
Published: (2014-01-01)

BRASS COATING DEFECTS AND THEIR IMPACT ON THE QUALITY OF THIN BRASS WIRE
by: I. V. Borisovets, et al.
Published: (2013-09-01)

BRASS COATING DEFECTS AND THEIR IMPACT ON THE QUALITY OF THIN BRASS WIRE
by: I. V. Borisovets, et al.
Published: (2013-09-01)

Melting point-structure relationships of multicomponent crystals
by: Ayamine, Alban
Published: (2017)

Effects of brass addition on the flexural strength and microstructure of porous clay/brass composites
by: Amin Muh, et al.
Published: (2018-01-01)

Investigation of the Mechanical Properties for Hot Pressing of Brass Matrix Composite
by: Yang Kuang Yao, et al.
Published: (2012)

INVESTIGATION OF CASTING DIAMETER INFLUENCE ON SPEED OF ITS HARDENING AND MICROSTRUCTURE AT FLOODED-JET COOLING
by: V. Yu. Stetsenko, et al.
Published: (2009-11-01)

PHASE COMPOSITION OF ALLOYED BRASSES IN CAST AND HEAT-TREATED STATE
by: V. S. Shumihin, et al.
Published: (2005-05-01)

Investigation of the High Speed Milling Characteristics on Hardened Hot Working Tool Steels
by: Hong-Liang Chien, et al.
Published: (2007)

Chemical Plating Improves the Mechanical Properties of Brass
by: Zheng, Wei-Lin, et al.
Published: (2019)

THE SEMIEMPIRICAL MODEL OF THE MULTICOMPONENT BUBBLE BEHAVIOUR IN GLASS MELTS
by: LUBOMÍR NĚMEC, et al.
Published: (2012-12-01)

Modeling Activity and Interaction Coefficients of Components of Multicomponent Alloy Melts: An Example of Iron Melt
by: Zhang Ning, et al.
Published: (2013-06-01)

Specific features of electrophysical properties of multicomponent heterogeneous systems
by: L A Scherbachenko, et al.
Published: (2010-06-01)

An Investigation of Improvement on Nosing of Brass Bottle
by: HSIEH,MENG-CHI, et al.
Published: (2017)

HARDENING OF THE ELECTRODESIEGED IRON CHEMICAL HEAT TREATMENT
by: V. I. Serebrovskii, et al.
Published: (2015-07-01)

An Ensemble Brass Method for College Brass Classes.
by: Averyt, Alton Roger
Published: (1949)

MODIFICATION OF THE BRASS COATING BY COBALT
by: I. A. Muraveikо, et al.
Published: (2018-07-01)

CHEMICAL MEASUREMENTS BY ELECTRICAL PARAMETERS TO CONTROL THE COMPOSITION OF MULTICOMPONENT LIQUIDS
by: Lidiya Parashchuk, et al.
Published: (2019-11-01)

Simulation of Hardening and Cooling Processes for Moving Melts in Special Casting Technologies
by: R. I. Esman, et al.
Published: (2008-08-01)

RESEARCH OF USING OF ADDITIONAL COPPER PLATING OF BRASS COVERING IN THE LINE OF STEEL WIRE BRASS PLATING
by: Yu. L. Bobarikin, et al.
Published: (2012-11-01)

Investigation of the Process Window for Laser Surface Hardening a SAEM2 High-speed steel
by: Francisco Jorge Carneiro Moreira da Silva
Published: (2021)

Quantitative investigation of the multicomponent fuel droplet combustion using high speed imaging and digital image processing
by: Faik, Ahmad Muneer El-Deen
Published: (2017)

Brass Band History and Idiomatic Writing in Brass Music
by: Kahler, Elyse T.
Published: (2013)

APPLICATION OF SCANNING ELECTRON MICROSCOPE EQUIPPED WITH THE MICROANALYSIS SYSTEM FOR INVESTIGATION OF BRASS COVERING
by: T. P. Kurenkova, et al.
Published: (2010-08-01)

Investigation of the martensitic transformation in metastable beta brass
by: Suoninen, Eero Juhani.
Published: (2020)

BUFFER CAPACITY IN HETEROGENEOUS MULTICOMPONENT SYSTEMS. REVIEW
by: Oxana Spinu, et al.
Published: (2015-12-01)

The Brass Bowl
by: Dania Idriss
Published: (2020-12-01)

THREE ANTIPHONIES FOR TWO BRASS CHOIRS. (ORIGINAL COMPOSITION)

Interface Microstructure and Nanoindentation Characterization of Laser Offset Welded 5052 Aluminum to Press-Hardened Steel Using a Brass Interlayer
by: Xiaobing Cao, et al.
Published: (2019-10-01)

An Experimental Investigation on Micro End Milling with High-Speed Up Cut Milling for Hardened Die Steel
by: Haruki Kino, et al.
Published: (2020-10-01)

Thermal treatment at induction heating and structure of steel grit, hardened from melt
by: P. S. Gurchenko, et al.
Published: (2003-11-01)

MAGNETIC PROPERTIES OF MULTICOMPONENT HETEROGENEOUS MEDIA WITH A DOUBLY PERIODIC STRUCTURE
by: S. T. Tolmachev, et al.
Published: (2020-02-01)

Application of a number of physical and chemical analysis methods the assessment of a multicomponent sample composition of natural water
by: L. V. Trubacheva, et al.
Published: (2020-09-01)

CONTRIBUTION OF CAST STRUCTURE TO THE LEVEL OF HARDENING OF THE TOOL STEEL FOR HOT FORMING, RECEIVED AT INDUCTION MELTING
by: V. N. Fedulov
Published: (2014-01-01)