Understanding the Links between the Composition-Processing-Properties in New Formulations of HEAs Sintered by SPS

Understanding the Links between the Composition-Processing-Properties in New Formulations of HEAs Sintered by SPS

This work presents two new compositions of high entropy alloys (HEAs) that were designed with the aim of obtaining a body-centered cubic (BCC) phase with high hardness values and a moderate density. Sintering was performed using Spark Plasma Sintering (SPS) with different heating rates to determine...

Full description

Bibliographic Details
Main Authors:	Paula Alvaredo-Olmos, Jon Molina-Aldareguía, Alvaro Vaz-Romero, Estela Prieto, Jesús González-Julián, Miguel Alberto Monclús
Format:	Article
Language:	English
Published:	MDPI AG 2021-05-01
Series:	Metals
Subjects:	composition design high entropy alloy gas atomization Spark Plasma Sintering high temperature nanoindentation serrated flow
Online Access:	https://www.mdpi.com/2075-4701/11/6/888

Similar Items

Effect of Binding and Dispersion Behavior of High-Entropy Alloy (HEA) Powders on the Microstructure and Mechanical Properties in a Novel HEA/Diamond Composite
by: Mingyang Zhang, et al.
Published: (2018-12-01)

Microstructure Evolution in a Fast and Ultrafast Sintered Non-Equiatomic Al/Cu HEA
by: Eduardo Reverte, et al.
Published: (2021-05-01)

A high entropy silicide by reactive spark plasma sintering
by: Yuan Qin, et al.
Published: (2019-03-01)

Influence of the Mn Content on the Corrosion Behaviour of HEA CoCrFeNiMnX (X=5, 20, 35 at.%) Prepared via MA+SPS
by: Kratochvíl, P., et al.
Published: (2023)

Thermal-Electrical-Mechanical Simulation of High Pressure Spark Plasma Sintering (HP-SPS) Process
by: Achenani Youssef, et al.
Published: (2019-01-01)

"Spark plasma sintering" (SPS) de nanocompósitos de Al2O3-ZrO2 Spark plasma sintering (SPS) of Al2O3-ZrO2 nanocomposites
by: V. Trombini, et al.
Published: (2007-03-01)

Gradient Distribution of Microstructures and Mechanical Properties in a FeCoCrNiMo High-Entropy Alloy during Spark Plasma Sintering
by: Mingyang Zhang, et al.
Published: (2019-03-01)

Flash spark plasma sintering of pure TiB2
by: Simone Failla, et al.
Published: (2021-03-01)

High-Pressure Spark Plasma Sintering (HP SPS): A Promising and Reliable Method for Preparing Ti–Al–Si Alloys
by: Anna Knaislová, et al.
Published: (2017-04-01)

Refractory CrMoNbWV High-Entropy Alloy Manufactured by Mechanical Alloying and Spark Plasma Sintering: Evolution of Microstructure and Properties
by: Nikolay Razumov, et al.
Published: (2021-01-01)

Nanocompósitos de Al2O3-SiC sinterizados por "spark plasma sintering" (SPS) Al2O3-SiC nanocomposites sintered by spark plasma sintering
by: V. Trombini, et al.
Published: (2008-09-01)

Mechanical Properties of Nanostructured CoCrFeNiMn High-Entropy Alloy (HEA) Coating
by: Chaoqun Dang, et al.
Published: (2018-08-01)

Phases, Microstructures and Mechanical Properties of CoCrNiCuZn High-Entropy Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering
by: Yuchen Sun, et al.
Published: (2019-01-01)

Effect of Zr Addition on the Microstructure and Mechanical Properties of CoCrFeNiMn High-Entropy Alloy Synthesized by Spark Plasma Sintering
by: Hongling Zhang, et al.
Published: (2018-10-01)

Bioglass and bioceramic composites processed by Spark Plasma Sintering (SPS): biological evaluation Versus SBF test
by: Bellucci Devis, et al.
Published: (2017-12-01)

Bioglass and bioceramic composites processed by Spark Plasma Sintering (SPS): biological evaluation Versus SBF test
by: Bellucci Devis, et al.
Published: (2018-01-01)

Spark Plasma Sintering of a Gas Atomized Al7075 Alloy: Microstructure and Properties
by: Orsolya Molnárová, et al.
Published: (2016-12-01)

Validation of serrated polyps (SPs) in Swedish pathology registers
by: Soran R. Bozorg, et al.
Published: (2019-12-01)

High Speed Steel with Iron Addition Materials Sintered by Spark Plasma Sintering
by: Marcin Madej, et al.
Published: (2020-11-01)

Microstructural evolution and sliding wear studies of copper-alumina micro- and nano-composites fabricated by spark plasma sintering
by: Dash Khushbu, et al.
Published: (2015-05-01)

Glass-Ceramics Processed by Spark Plasma Sintering (SPS) for Optical Applications
by: Babu Singarapu, et al.
Published: (2020-04-01)

The Origins of High-Entropy Alloy Contamination Induced by Mechanical Alloying and Sintering
by: Igor Moravcik, et al.
Published: (2020-09-01)

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite
by: Hanzhu Zhang, et al.
Published: (2020-09-01)

Comparative evaluation of spark plasma (SPS), microwave (MWS),two stage sintering (TSS) and conventional sintering (CRH) on the densification and micro structural evolution of fully stabilized zirconia ceramics
by: Rajeswari K., et al.
Published: (2010-01-01)

Effect of Spark Plasma Sintering on Microstructure and Properties of TiB<sub>2</sub>/AlCoCrFeNi Composites
by: XIAO Dai-hong, et al.
Published: (2018-03-01)

Microstructure and Mechanical Properties of AA7075 Aluminum Alloy Fabricated by Spark Plasma Sintering (SPS)
by: Elder Soares, et al.
Published: (2021-01-01)

High-Energy Ball Milling and Spark Plasma Sintering of the CoCrFeNiAl High-Entropy Alloy
by: Alexander S. Rogachev, et al.
Published: (2020-11-01)

The influence of SPS heating rates on the synthesis reaction of tantalum diboride
by: Jolanta Laszkiewicz-Łukasik, et al.
Published: (2016-07-01)

Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy
by: Zdeněk Chlup, et al.
Published: (2019-10-01)

Effect of SPS Sintering Temperature on Properties of ZrB<sub>2</sub>-SiC Ceramic
by: LI Qi, et al.
Published: (2018-08-01)

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
by: P. V. Satyanarayana, et al.
Published: (2019-09-01)

Relación entre los mecanismos de difusión atómica y las propiedades ópticas en la sinterización por Spark Plasma Sintering (SPS) de la alúmina.
by: Torrecillas, R., et al.
Published: (2009-12-01)

Bimodal Microstructure in an AlZrTi Alloy Prepared by Mechanical Milling and Spark Plasma Sintering
by: Orsolya Molnárová, et al.
Published: (2020-08-01)

Sintering of mixed Ca–K–Na phosphates: Spark plasma sintering vs flash-sintering
by: N. Orlov, et al.
Published: (2021-03-01)

A Review of the Serrated-Flow Phenomenon and Its Role in the Deformation Behavior of High-Entropy Alloys
by: Jamieson Brechtl, et al.
Published: (2020-08-01)

Progress of Spark Plasma Sintering (SPS) Method, Systems, Ceramics Applications and Industrialization
by: Masao Tokita
Published: (2021-04-01)

Enhancing strength-ductility synergy in an ex situ Zr-based metallic glass composite via nanocrystal formation within high-entropy alloy particles
by: Huaping Ding, et al.
Published: (2021-11-01)

High-Temperature Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi<sub>0.5</sub> High-Entropy Alloy
by: Martin Löbel, et al.
Published: (2019-06-01)

Master Sintering Surface: A practical approach to its construction and utilization for Spark Plasma Sintering prediction
by: Pouchly V., et al.
Published: (2012-01-01)

Preparation of silicon carbide/carbon fiber composites through high-temperature spark plasma sintering
by: Ehsan Ghasali, et al.
Published: (2017-12-01)

Cannot write session to /tmp/vufind_sessions/sess_o22p6hgpd74qdqjfc1si3j6clv