Optimization of fall height setting for drop weight tested polypropylene

Optimization of fall height setting for drop weight tested polypropylene

This study deals with polypropylene (PP) which was subjected the drop-weight test. PP is a semicrystalline thermoplastic polymer which is commonly used in many indoor applications and also in the automotive industry in the car interiors. The injection moulded PP samples were subjected the penetratio...

Full description

Bibliographic Details
Main Authors: Hylova Lenka, Manas Miroslav
Format: Article
Language:English
Published: EDP Sciences 2017-01-01
Series:MATEC Web of Conferences
Online Access:https://doi.org/10.1051/matecconf/201712502049
id doaj-3cf0e9d05c8f4abc999d0bfb89da6f7e
record_format Article
spelling doaj-3cf0e9d05c8f4abc999d0bfb89da6f7e2021-02-02T00:52:45ZengEDP SciencesMATEC Web of Conferences2261-236X2017-01-011250204910.1051/matecconf/201712502049matecconf_cscc2017_02049Optimization of fall height setting for drop weight tested polypropyleneHylova Lenka0Manas Miroslav1Tomas Bata University in ZlinTomas Bata University in ZlinThis study deals with polypropylene (PP) which was subjected the drop-weight test. PP is a semicrystalline thermoplastic polymer which is commonly used in many indoor applications and also in the automotive industry in the car interiors. The injection moulded PP samples were subjected the penetration test at different fall heights and the results were subsequently evaluated and discussed. It was found out that the fall heights from 100 to 230 J are suitable for PP penetration, but the optimal one is 100 J. Higher heights are not needed because of increasing power consumption of the test device.https://doi.org/10.1051/matecconf/201712502049
collection DOAJ
language English
format Article
sources DOAJ
author Hylova Lenka
Manas Miroslav
spellingShingle Hylova Lenka
Manas Miroslav
Optimization of fall height setting for drop weight tested polypropylene
MATEC Web of Conferences
author_facet Hylova Lenka
Manas Miroslav
author_sort Hylova Lenka
title Optimization of fall height setting for drop weight tested polypropylene
title_short Optimization of fall height setting for drop weight tested polypropylene
title_full Optimization of fall height setting for drop weight tested polypropylene
title_fullStr Optimization of fall height setting for drop weight tested polypropylene
title_full_unstemmed Optimization of fall height setting for drop weight tested polypropylene
title_sort optimization of fall height setting for drop weight tested polypropylene
publisher EDP Sciences
series MATEC Web of Conferences
issn 2261-236X
publishDate 2017-01-01
description This study deals with polypropylene (PP) which was subjected the drop-weight test. PP is a semicrystalline thermoplastic polymer which is commonly used in many indoor applications and also in the automotive industry in the car interiors. The injection moulded PP samples were subjected the penetration test at different fall heights and the results were subsequently evaluated and discussed. It was found out that the fall heights from 100 to 230 J are suitable for PP penetration, but the optimal one is 100 J. Higher heights are not needed because of increasing power consumption of the test device.
url https://doi.org/10.1051/matecconf/201712502049
work_keys_str_mv AT hylovalenka optimizationoffallheightsettingfordropweighttestedpolypropylene
AT manasmiroslav optimizationoffallheightsettingfordropweighttestedpolypropylene
_version_ 1724312696589910016

Similar Items