Prediction of High-Cycle Fatigue Performance of 1Cr11Ni2W2MoV Stainless Steel Plate after Foreign Object Damage

• Main Authors: Zhenhua Zhao, Lingfeng Wang, Chao Liu, Lulu Liu, Wei Chen
• Format: Article
• Language: English
• Published: Hindawi Limited 2020-01-01
• Series: International Journal of Aerospace Engineering
• Online Access: http://dx.doi.org/10.1155/2020/8837564
• ISSN: 1687-5966; 1687-5974

High-cycle fatigue (HCF) properties of 1Cr11Ni2W2MoV stainless steel impacted by a high-speed steel ball were studied by the foreign object damage (FOD) test and HCF test. The results show that the damage depth Z has the most obvious effect on the HCF limit of notched flat plate specimens, and the fatigue limit decreases with the increase of depth Z. The microcharacteristics of the FOD notch and HCF fracture of 1Cr11Ni2W2MoV stainless steel were observed by a scanning electron microscope (SEM). The results show that the microdamage features such as plastic deformation, loss of material, and microcracks promote the initiation and propagation of fatigue cracks, and the fatigue source area lies near the root of the notch. The Peterson formula and Worst Case Notch (WCN) mode were used to predict the HCF limit of flat plate specimens after FOD. The crack growth threshold was obtained by the crack growth test. The results show that the prediction results of both methods are conservative. For the notch with damage depth Z<1 mm, the prediction accuracy of the WCN model is higher (error range<30%). For the notch with damage depth Z>1 mm, the prediction results of both methods have large errors (>30%) with the WCN model being slightly more accurate.