| Summary: | Ds-type inclusions during production are an important factor affecting the performance and quality of manufactured 10B21 steel. To minimize Ds-type inclusions in steel and improve the production qualification rate of steelmaking plants, a refining slag system optimization scheme was proposed based on the analysis of current inclusion evolution during the steelmaking process, and industrial tests were conducted to verify improvements resulting from application of the proposed scheme. The results showed that the composition of Ds inclusions in 10B21 steel are mainly CaO–Al<sub>2</sub>O<sub>3</sub>–MgO–CaS–TiN, which exists in the form of calcium–magnesium aluminate coated with titanium nitride and calcium sulfide. The main reason for the formation of Ds inclusions is the poor fluidity of the refining slag and its low capability to absorb inclusions. The poor coverage of the refining slag on the molten steel during refining can easily cause secondary oxidation of the molten steel. Thus, the formation and growth of Ds-type inclusions are aggravated after the calcium feeding line and soft blowing operation. Here, we propose to minimize Ds inclusions using our optimized refined slag system. The mass percentage of the optimized slag system is CaO: 55–60%, Al<sub>2</sub>O<sub>3</sub>: 20–35%, SiO<sub>2</sub>: 3–7%, MgO: 4–8%, (MnO + FeO) < 1%, and the basicity is controlled within the range of 7–11. We observed that our optimized refining slag system has a significantly improved ability to remove inclusions, particularly Ds inclusions, which improves the qualification rate of 10B21 steel.
|
|---|
