Effect of a minute substitution on the structure and microwave dielectric properties of novel LiCoVO4 ceramics for ULTCC applications

• Main Authors: Cheng-Liang Huang, Pei-En Chiang, Tsung-Hsien Hsu
• Format: Article
• Language: English
• Published: Taylor & Francis Group 2021-07-01
• Series: Journal of Asian Ceramic Societies
• Subjects: ultcc; lico1-xaxvo4 ceramics; high-q; microwave dielectric properties
• Online Access: http://dx.doi.org/10.1080/21870764.2021.1945746

The feasibility of novel LiCo1-xAxVO4 (A = Mg, Zn; x = 0–0.09) microwave dielectrics for ULTCC (ultra-low temperature co-fired ceramics) applications was investigated. Continuous solid solutions were formed as expected in the whole composition range and can be indexed in the cubic system with the Fd3m space group. The Raman spectrum of the specimen was also analyzed. All samples can be sintered into dense ceramics (relative density> 97%) at the temperature 650°C. The variation of structure parameters resulted from minutely substituting Co with Mg or Zn has significant effect on the microwave dielectric properties of the specimen. The relative density and dielectric polarizability have significant impact on the ɛr of the specimens. Q × f value is dominated by the density and packing fraction of the ceramics. The τf, however, was mainly controlled by the bond-valence of the samples under a minute substitution. Specimen with 0.01 mol% Zn-substitution at 650°C revealed the highest Q × f of 53,000 GHz along with an εr of 13.2 and a τf of – 57.5 ppm/°C. It also exhibited a good Al-cofiring chemical compatibility.