Reconstruction of Severe Acetabular Bone Defect with 3D Printed Ti6Al4V Augment: A Finite Element Study

Reconstruction of Severe Acetabular Bone Defect with 3D Printed Ti6Al4V Augment: A Finite Element Study

Purpose. The purpose of this study was to establish the finite element analysis (FEA) model of acetabular bone defect reconstructed by 3D printed Ti6Al4V augment and TM augment and further to analyze the stress distribution and clinical safety of augments, screws, and bones. Methods. The FEA model o...

Full description

Bibliographic Details
Main Authors:	Jun Fu, Ming Ni, Jiying Chen, Xiang Li, Wei Chai, Libo Hao, Guoqiang Zhang, Yonggang Zhou
Format:	Article
Language:	English
Published:	Hindawi Limited 2018-01-01
Series:	BioMed Research International
Online Access:	http://dx.doi.org/10.1155/2018/6367203

Similar Items

In Vivo Reconstruction of the Acetabular Bone Defect by the Individualized Three-Dimensional Printed Porous Augment in a Swine Model
by: Jun Fu, et al.
Published: (2020-01-01)

The use of augmented antibiotic-loaded cement spacer in periprosthetic joint infection patients with acetabular bone defect
by: Jun Fu, et al.
Published: (2020-10-01)

Acetabular Bone Defect in Total Hip Arthroplasty for Crowe II or III Developmental Dysplasia of the Hip: A Finite Element Study
by: Yinqiao Du, et al.
Published: (2020-01-01)

Acetabular Reconstruction Using a Trabecular Metal Cup with a Novel Pelvic Osteotomy Technique for Severe Acetabular Bone Defect
by: Keizo Wada, et al.
Published: (2018-01-01)

Multicup reconstruction technique for the management of severe protrusio acetabular defects
by: Baochao Ji, et al.
Published: (2021-07-01)

All-Arthroscopic Reconstruction of the Acetabular Labrum by Capsular Augmentation
by: Benedict U. Nwachukwu, M.D., M.B.A., et al.
Published: (2015-04-01)

The Comparative Analysis of a Novel Acetabular Component against Hemispherical Component in Case of Extensive Acetabular Bone Defects — A Study of Finite Element Analysis
by: Wenhui Ma, et al.
Published: (2013-02-01)

3D Printing Hip Prostheses Offer Accurate Reconstruction, Stable Fixation, and Functional Recovery for Revision Total Hip Arthroplasty with Complex Acetabular Bone Defect
by: Yongqiang Hao, et al.
Published: (2020-11-01)

Tantalum Augments Combined with Antiprotrusio Cages for Massive Acetabular Defects in Revision Arthroplasty
by: Hinnerk Baecker, MD, et al.
Published: (2020-12-01)

Acetabular wedge augments for uncontained tibial plateau defects in revision total knee arthroplasty
by: Jeffrey B. Stambough, MD, et al.
Published: (2018-09-01)

3D Printing Aids Acetabular Reconstruction in Complex Revision Hip Arthroplasty
by: Andrew J. Hughes, et al.
Published: (2017-01-01)

Induced Membrane Bone Grafting Technique for Treatment of Large Postinfectious Acetabular Bone Defects
by: Gerald Joseph Zeng, MBBS (Spore), MRCS (England), et al.
Published: (2020-09-01)

Use of Structural Bone Graft for Reconstruction of Acetabular Defects in Primary Total Hip Arthroplasty: A 13-year Experience
by: Kwong-Ting Ho, et al.
Published: (2016-06-01)

Custom Triflange Acetabular Components for Revision Hip Arthroplasty in the Patients with Severe Acetabular Defects: Planning, Surgical Technique, Outcomes
by: A. A. Korytkin, et al.
Published: (2020-07-01)

Reconstruction options and outcomes for acetabular bone loss in revision hip arthroplasty
by: Fabio Mancino, et al.
Published: (2020-06-01)

Reconstructing Bone with Natural Bone Graft: A Review of In Vivo Studies in Bone Defect Animal Model
by: Mengying Liu, et al.
Published: (2018-12-01)

Reverse augmentation technique in hip revision arthroplasty: a new strategy for the management of acetabular reconstruction
by: Christian Götze, et al.
Published: (2020-09-01)

Preliminary biomechanical study of different acetabular reinforcement devices for acetabular reconstruction.
by: Ching-Lung Tai, et al.
Published: (2015-01-01)

Bipolar hip arthroplasty as salvage treatment for loosening of the acetabular cup with significant bone defects
by: Ghanem, Mohamed, et al.
Published: (2016-04-01)

Biomechanical Study of a Novel Interlocking Acetabular Reinforcement Device for Acetabular Reconstruction
by: Po Yi Li, et al.
Published: (2013)

Reconstruction of acetabular defects greater than Paprosky type 3B: the importance of functional imaging
by: Anna Di Laura, et al.
Published: (2021-02-01)

Biomechanical Evaluation of 3D Printed Titanium Reconstruction/Prosthetic Framework for Mandibular Segmental Osteotomy Defect－Finite Element Analysis
by: Sheng-Ni Huang, et al.
Published: (2018)

Acetabular reconstruction with human and bovine freeze-dried bone grafts and a reinforcement device
by: Ricardo Rosito, et al.
Published: (2008-01-01)

Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia
by: Minxun Lu, et al.
Published: (2018-03-01)

Three-dimensional printed tissue engineered bone for canine mandibular defects
by: Li Zhang, et al.
Published: (2020-03-01)

HIP ENDOPROSTHESIS REPLACEMENT APPROACH TO ACETABULAR DEFECTS
by: I.A. Norkin, et al.
Published: (2008-12-01)

Quantitative assessment of acetabular bone defects: A study of 50 computed tomography data sets.
by: Ronja A Schierjott, et al.
Published: (2019-01-01)

Stress analysis of a Burch-Schneider cage in an acetabular bone defect: A case study
by: Katrien Plessers, et al.
Published: (2016-04-01)

What Characteristics of the Acetabular Defect Influence the Choice of the Acetabular Component During Revision Hip Arthroplasty?
by: R. M. Tikhilov, et al.
Published: (2020-07-01)

Simulated Performance of a Xenohybrid Bone Graft (SmartBone<sup>®</sup>) in the Treatment of Acetabular Prosthetic Reconstruction
by: Carlo Francesco Grottoli, et al.
Published: (2019-11-01)

The mid-long term results of reconstructional cage and morselized allografts combined application for the Paprosky type III acetabular bone defects in revision hip arthroplasty
by: Qiang Xiao, et al.
Published: (2019-11-01)

Labral Gracilis Tendon Allograft Reconstruction and Cartilage Regeneration Scaffold for an Uncontained Acetabular Cartilage Defect of the Hip
by: Laurel E. MacInnis, B.Sc.H.K., B.Sc.P.A., C.C.P.A., et al.
Published: (2017-06-01)

Reconstruction of the Anterior Acetabular Wall to Repair Symptomatic Defects Consecutive to Cup Malpositioning at Total Hip Arthroplasty
by: Lara Pozzi, MD, et al.
Published: (2021-02-01)

Quantitative Computerized Assessment of the Degree of Acetabular Bone Deficiency: Total radial Acetabular Bone Loss (TrABL)
by: Frederik Gelaude, et al.
Published: (2011-01-01)

Finite element analysis of mandibular defect with fibula reconstruction combined with innovative bone plate
by: Te-Hsin Yu, et al.
Published: (2019)

Mechanical Characterization of 3D-Printed Individualized Ti-Mesh (Membrane) for Alveolar Bone Defects
by: Liyun Bai, et al.
Published: (2019-01-01)

Mid-Term Outcomes of Revision Hip Arthroplasty with Acetabular Augments
by: A. A. Korytkin, et al.
Published: (2019-05-01)

Mid-Term Outcomes of Revision Hip Arthroplasty with Acetabular Augments
by: A. A. Korytkin, et al.
Published: (2019-05-01)

Surgical resection and reconstructive techniques using autologous femoral head bone-grafting in treating partial acetabular defects arising from primary pelvic malignant tumors
by: Wei Sun, et al.
Published: (2019-10-01)

Copas de metal trabecular y aloinjertos óseos impactados en defectos acetabulares graves. Resultados a los 2-4 años. [Impacted bone allografts and trabecular metal cups in severe acetabular bone defects: 2 to 4-year results.]
by: Martín Buttaro, et al.
Published: (2014-06-01)

Cannot write session to /tmp/vufind_sessions/sess_19isiudsmeruqv63jtg3n9l7kj