Determination of the Natural Frequency of the Model Spindle System with Active Regulation of the Initial Tension of the Bearings

• Main Author: Paweł Turek
• Format: Article
• Language: English
• Published: MDPI AG 2021-07-01
• Series: Lubricants
• Subjects: machine tool; angular contact bearings; preload; natural frequency
• Online Access: https://www.mdpi.com/2075-4442/9/7/68

This article presents a test stand with a model high-speed spindle equipped with a system of active control of the preload of the bearings. This preload was changed by means of three piezo actuators. The work presents the results of tests during which the commercial Abacus measuring equipment from Data Physics was used. Its application has shown that the spindle system with angular contact ball bearings is responsive to changes in the preload value of these bearings. The change preload resulted in a change in the value of the resonant frequency of the system and its amplitude. This article presents the dependence between the variable value of the preload of the bearings and the corresponding values of the resonance frequency and amplitude of the spindle system. The use of the Abacus measuring equipment for testing allowed for the preparation of a model showing the dynamic behavior of the spindle. The system was forced by a signal with known parameters, and the response to this excitation was recorded at eleven points located on the surface of the entire spindle.