ELECTRODEPOSITION KINETICS AND THE SURFACE MORPHOLOGY OF CADMIUM AND CADMIUM-ORGANIC COATINGS CONTAINING ε-CAPROLACTAM

• Main Authors: Skibina Lilia Mikhailovna, Duran Delgado Oscar Andrés, Sokolenko Alla Ivanovna
• Format: Article
• Language: English
• Published: Voronezh State University 2017-09-01
• Series: Конденсированные среды и межфазные границы
• Subjects: electrodeposition; kinetics; chronopotentiometry; morphology; surface; coatings; complexation; adsorption.
• ISSN: 1606-867X; 1606-867X

Metal polymeric coverings are of special interest as a new class of materials that have the properties of both metals and polymers. Unfortunately, information about the similar coverings electrodeposition and the mechanism of transformation taking place in a solution or at electrode surface is quite limited. We investigated the infl uence of caprolactam (CPL), tetrahydrofuran (THF) and propylene carbonate (PC) additives on the kinetics of cathodic processes in the cadmium sulfate electrolyte, microstructure and the grain size of metal and metal–polymeric deposits. The addition of cyclic lactam changes adsorption and coordination properties of the electrolyte components, the type of cathodic process and leads to a considerable improvement in their structure and physicalmechanical characteristics. Using chronopotentiometry analysis with impedance data, it was found that the real electroactive species formed in aqueous–organic mixtures determine the electrodeposition kinetics due to complexation of discharging metal ions with adsorbed molecules of additives. It was established the ε-caprolactam addition resulted in the growth of cathodic polarization ΔE the value of which depends on the volume concentration cLo According to the polarization and impedance measurements, an increase in co L intensifi es the participation of organic molecules, fi rst in the adsorption process at the Cd-cathode (coL ≤ 0.1 M) and then in the complexion with cadmium ions in the solution volume (co L > 0.1 M). In the latter case, elecroactive particles that are formed in the solution take place in electrodeposion reactons which leads to increased CPL content in the Cd-covering. The infl uence of THF and PC results in a slight increase of exchange current and coeffi cient bc and a decrease of diffusion coeffi cient D and transfer coeffi cient a. The codeposition of metal with polymer leads to a signifi cant decrease in the grain volume and size of metal inclusions. A comparison of the 3D scans of the surface of the obtained coatings verifi ed the formation of the cadmium based metal-polymer coatings in presence of CPL. Varying the electrolyte composition and technological conditions of plating makes it possible to control both the metal–polymer ratio in the coating and the grain sizes of the metallic phase in the formed metal–olymeric fi lms.