Effect of carbon addition on functional and mechnical properties of the Ni<sub>3</sub>Al phase

Effect of carbon addition on functional and mechnical properties of the Ni<sub>3</sub>Al phase

Casting technology was applied and research was carried out on two alloys based on the Ni3Al phase with variable carbon content of 0,2 and 1,25 wt. % C, respectively. Resistance to abrasive wear, friction coefficient and Vickers microhardness were determined. Metallographic studies were conducted to...

Full description

Bibliographic Details
Main Authors:	E. Olejnik, A. Janas, B. Grabowska, M. Kawalec
Format:	Article
Language:	English
Published:	Croatian Metallurgical Society 2012-10-01
Series:	Metalurgija
Subjects:	Ni<sub>3</sub>Al carbon wear rate friction coefficient microhardness
Online Access:	http://hrcak.srce.hr/file/123367

Similar Items

Tribological Properties of Al<sub>2</sub>O<sub>3</sub> Nanoparticles as Lithium Grease Additives
by: Ahmed Nabhan, et al.
Published: (2021-01-01)

Grain size influences the corrosion and cavitation of Ni<sub>3</sub>Al intermetallic alloys
by: D. Zasada, et al.
Published: (2015-01-01)

Differences in Dry Sliding Wear Behavior between Al–12Si–CuNiMg Alloy and Its Composite Reinforced with Al<sub>2</sub>O<sub>3</sub> Fibers
by: Qing Zhang, et al.
Published: (2019-05-01)

Manufacturing of Al<sub>2</sub>O<sub>3</sub>/Ni/Ti Composites Enhanced by Intermetallic Phases
by: Marcin Wachowski, et al.
Published: (2021-06-01)

Preparation and Tribological Properties of Carbon-Coated WS<sub>2</sub> Nanosheets
by: Zheng Li, et al.
Published: (2019-09-01)

Friction and Wear Properties of Ni<sub>3</sub>Si Alloy with Ti Addition at High Temperatures
by: Changyin Wu, et al.
Published: (2020-02-01)

Characterization of Al<sub>2</sub>O<sub>3</sub> Samples and NiAl–Al<sub>2</sub>O<sub>3</sub> Composite Consolidated by Pulse Plasma Sintering
by: Katarzyna Konopka, et al.
Published: (2021-06-01)

Effect of Porous Structure on the Microwave Absorption Capacity of Soft Magnetic Connecting Network Ni/Al<sub>2</sub>O<sub>3</sub>/Ni Film
by: Hu Wei, et al.
Published: (2020-04-01)

Improvement of High Temperature Wear Behavior of In-Situ Cr<sub>3</sub>C<sub>2</sub>-20 wt. % Ni Cermet by Adding Mo
by: Liang Sun, et al.
Published: (2020-08-01)

Synthesis and Properties of Electrodeposited Ni–Co/WS<sub>2</sub> Nanocomposite Coatings
by: Yang He, et al.
Published: (2019-02-01)

CO<sub>2</sub> Methanation over Ni/Al@MAl<sub>2</sub>O<sub>4</sub> (M = Zn, Mg, or Mn) Catalysts
by: Thien An Le, et al.
Published: (2019-07-01)

The Influence of Laser Surface Remelting on the Tribological Behavior of the ECAP-Processed AZ61 Mg Alloy and AZ61–Al<sub>2</sub>O<sub>3</sub> Metal Matrix Composite
by: Beáta Ballóková, et al.
Published: (2020-06-01)

Tribological Behavior of Multi-layered WC-Co/MoS<sub>2</sub>-Ni Self-lubricating Coating Fabricated by Detonation Gun Spraying
by: WANG Tie-gang, et al.
Published: (2017-03-01)

Unidirectional Crystal Orientation of Dual-Phase Ni<sub>3</sub>Al-Based Alloy via Laser Irradiation
by: Satoshi Semboshi, et al.
Published: (2020-07-01)

Well-Dispersed MgAl<sub>2</sub>O<sub>4</sub> Supported Ni Catalyst with Enhanced Catalytic Performance and the Reason of Its Deactivation for Long-Term Dry Methanation Reaction
by: Fen Wang, et al.
Published: (2021-09-01)

Microstructure and Properties of TiB<sub>2</sub> Composites Produced by Spark Plasma Sintering with the Addition of Ti<sub>5</sub>Si<sub>3</sub>
by: Agnieszka Twardowska, et al.
Published: (2021-07-01)

Preparation and Thermal Expansion Properties of Zr<sub>2</sub>P<sub>2</sub>WO<sub>12</sub>/Fe-Ni Composites
by: QI Rui-qiong, et al.
Published: (2016-12-01)

Synergy Effects of Cobalt Oxides on Ni/Co-Embedded Al<sub>2</sub>O<sub>3</sub> for Hydrogen-Rich Syngas Production by Steam Reforming of Propane
by: Kyung Soo Park, et al.
Published: (2020-04-01)

Effect of the Ni/Al Ratio on the Performance of NiAl<sub>2</sub>O<sub>4</sub> Spinel-Based Catalysts for Supercritical Methylcyclohexane Catalytic Cracking
by: Kyoung Ho Song, et al.
Published: (2021-03-01)

Erosion-Corrosion Protection Due to Cr<sub>3</sub>C<sub>2</sub>-NiCr Cermet Coating on Stainless Steel
by: Panneer Selvam Kevin, et al.
Published: (2020-10-01)

Microstructure and Wear-Resistant Properties of Ni80Al20-MoS<sub>2</sub> Composite Coating on Sled Track Slippers
by: Weihua Wang, et al.
Published: (2020-07-01)

Addition of Si<sub>3</sub>N<sub>4</sub> Strengthens SiC Coatings via Heat Treatment with Nitrogen Gas onto Carbon/Carbon Composites
by: Zuli Mao, et al.
Published: (2020-08-01)

Carbon Dioxide Conversion with High-Performance Photocatalysis into Methanol on NiSe<sub>2</sub>/WSe<sub>2</sub>
by: Zheng Luo, et al.
Published: (2020-08-01)

Catalytic Activity of Ni<sub>1-x</sub>Li<sub>2x</sub>WO<sub>4</sub> Particles for Carbon Dioxide Photoreduction
by: Jongmin Shin, et al.
Published: (2019-05-01)

The Effects of Grain Boundary Misorientation on the Mechanical Properties and Mechanism of Plastic Deformation of Ni/Ni<sub>3</sub>Al: A Molecular Dynamics Study
by: Jun Ding, et al.
Published: (2020-12-01)

Effect of nano-TiO<sub>2</sub> particles on mechanical performance of Al–CNT matrix composite
by: Saif S. Irhayyim, et al.
Published: (2019-01-01)

Role of Mixed Oxides in Hydrogen Production through the Dry Reforming of Methane over Nickel Catalysts Supported on Modified γ-Al<sub>2</sub>O<sub>3</sub>
by: Ahmed Sadeq Al-Fatesh, et al.
Published: (2021-01-01)

Surfactant-Free Electroless Codeposition of Ni–P–MoS<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> Composite Coatings
by: Ping Liu, et al.
Published: (2019-02-01)

Study on Tribological Properties and Mechanisms of Different Morphology WS<sub>2</sub> as Lubricant Additives
by: Ningning Hu, et al.
Published: (2020-03-01)

Effect of Y<sub>2</sub>O<sub>3</sub> on Friction and Wear Behavior of W-4.9Ni-2.1Fe Alloy
by: ZHANG Xue-hui, et al.
Published: (2017-11-01)

Room-Temperature and High-Temperature Wear Behaviors of As-Sprayed and Annealed Cr<sub>3</sub>C<sub>2</sub>-25NiCr Coatings Prepared by High Velocity Air-Fuel Spraying
by: Xuanzhen Liu, et al.
Published: (2020-11-01)

Age-Induced Precipitation and Hardening Behavior of Ni<sub>3</sub>Al Intermetallic Alloys Containing Vanadium
by: Satoshi Semboshi, et al.
Published: (2019-02-01)

Support Effect on the Performance of Ni<sub>2</sub>P Catalysts in the Hydrodeoxygenation of Methyl Palmitate
by: Irina V. Deliy, et al.
Published: (2018-11-01)

Study on the Microstructure, Mechanical Properties, and Erosive Wear Behavior of HVOF Sprayed Al<sub>2</sub>O<sub>3</sub>-15 wt.%TiO<sub>2</sub> Coating with NiAl Interlayer on Al-Si Cast Alloy
by: Marzanna Ksiazek, et al.
Published: (2020-09-01)

One-Pot Synthesis of Glucose-Derived Carbon Coated Ni<sub>3</sub>S<sub>2</sub> Nanowires as a Battery-Type Electrode for High Performance Supercapacitors
by: Zhongkai Wu, et al.
Published: (2021-03-01)

First-Principle Studies on the Mechanical and Electronic Properties of Al<sub>x</sub>Ni<sub>y</sub>Zr<sub>z</sub> (x = 1~3, y = 1~2, z = 1~6) Alloy under Pressure
by: Xiaoli Yuan, et al.
Published: (2020-11-01)

Ultrathin Al<sub>2</sub>O<sub>3</sub> Coating on LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode Material for Enhanced Cycleability at Extended Voltage Ranges
by: Wenchang Zhu, et al.
Published: (2019-02-01)

Facilely Synthesized NiCo<sub>2</sub>O<sub>4</sub>/NiCo<sub>2</sub>O<sub>4</sub> Nanofile Arrays Supported on Nickel Foam by a Hydrothermal Method and Their Excellent Performance for High-Rate Supercapacitance
by: Anil Kumar Yedluri, et al.
Published: (2019-04-01)

Theoretical Study on Structural Stability and Elastic Properties of Fe<sub>25</sub>Cr<sub>25</sub>Ni<sub>25</sub>Ti<sub>x</sub>Al<sub>(25-x)</sub> Multi-Principal Element Alloys
by: Li Liu, et al.
Published: (2021-02-01)

Synthesis and Characterization of a NiCo<sub>2</sub>O<sub>4</sub>@NiCo<sub>2</sub>O<sub>4</sub> Hierarchical Mesoporous Nanoflake Electrode for Supercapacitor Applications
by: Xin Chen, et al.
Published: (2020-06-01)

Cannot write session to /tmp/vufind_sessions/sess_rsijpfnd6sber0nang70ofdnkr