Investigation of a partial, inductive short-time heat treatment of thin metal sheets integrated into the forming process
Flanging is a widespread method in the sheet metal working industry to connect same or different materials by forming. Especially the sealing technology makes high demands on the flanging process: a low sheet thickness of the inner eyelet is necessary for proper sealing. The outer edges of the neck...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2018-01-01
|
| Series: | MATEC Web of Conferences |
| Subjects: | |
| Online Access: | https://doi.org/10.1051/matecconf/201819012008 |