NUMERICAL SIMULATION OF METAL MELT FLOWS IN MOLD CAVITY WITH CERAMIC POROUS MEDIA

NUMERICAL SIMULATION OF METAL MELT FLOWS IN MOLD CAVITY WITH CERAMIC POROUS MEDIA

Process modeling of metal melt flow in porous media plays an important role in casting of metal matrix composites. In this work, a mathematical model of the metal melt flow in preform ceramic particles was used to simulate the flow behavior in a mold cavity. The effects of fluid viscosity and permea...

Full description

Bibliographic Details
Main Authors:	Changchun Dong, Jianxin Zhou, Yin Yajun, Guo Zhao
Format:	Article
Language:	English
Published:	University of Chemistry and Technology, Prague 2016-05-01
Series:	Ceramics-Silikáty
Subjects:	Numerical simulation Metal matrix composites Flow process Porous media Ceramic preform
Online Access:	http://www.ceramics-silikaty.cz/index.php?page=cs_detail_doi&id=101

Similar Items

Manufacturing of Porous Ceramic Preforms Based on Halloysite Nanotubes (Hnts)
by: Kujawa M., et al.
Published: (2016-06-01)

Application of Ceramic Preforms to the Manufacturing of Ceramic - Metal Composites
by: Jach K., et al.
Published: (2013-12-01)

Influence of Grains Shape Irregularity in Porous Ceramics—Numerical Study
by: Danuta Miedzińska
Published: (2020-04-01)

Mechanics and Durability of Fiber Reinforced Porous Ceramic Composites
by: Huang, Xinyu
Published: (2014)

Carbon nanotube blackbody grown on the surface of porous ceramic cavities
by: Wataru Ando, et al.
Published: (2021-12-01)

In Vitro Cell Proliferation and Mechanical Behaviors Observed in Porous Zirconia Ceramics
by: Jing Li, et al.
Published: (2016-03-01)

Physicochemical processes in the zone of local laser heating of porous aluminosilicate ceramics
by: Pedro Antonio Márquez Aguilar, et al.
Published: (2021-03-01)

THE USE OF POROUS CERAMICS FOR EVAPORATIVE AND EVAPORATIVE – VAPOR –COMPRESSION SYSTEMS
by: Cheban D.N., et al.
Published: (2013-04-01)

Porous ceramic - metal composites obtained by infiltration methods
by: A. Boczkowska, et al.
Published: (2013-07-01)

A Numerical Study of Transport Phenomena in Porous Media
by: Liou, May-Fun
Published: (2005)

Research Progress in Oxide/Oxide Ceramic Matrix Composites and Processing Technologies
by: YANG Rui, et al.
Published: (2018-12-01)

Formation of a Novel Polypyrrole/Porous Phosphate Glass Ceramic Nanocomposite
by: Gimenez Iara F., et al.
Published: (1999-01-01)

Sol-gel derived porous ultra-high temperature ceramics
by: Fei Li, et al.
Published: (2020-02-01)

Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent
by: Obradović Nina, et al.
Published: (2017-01-01)

Fracture Behavior of Mullite Reticulated Porous Ceramics for Porous Media Combustion
by: Xiong Liang, et al.
Published: (2019-11-01)

Separation of Hydrogen from Carbon Dioxide through Porous Ceramics
by: Taro Shimonosono, et al.
Published: (2016-11-01)

Effect of Starch on Sintering Behavior for Fabricating Porous Cordierite Ceramic
by: Li Ye, et al.
Published: (2016-10-01)

Dense-porous multilayer ceramics by green shaping and salt leaching
by: Venkata Sundeep Seesala, et al.
Published: (2021-03-01)

Factors affecting the microstructure of porous ceramics
by: Tripković Dušan, et al.
Published: (2006-01-01)

Factors affecting the microstructure of porous ceramics
by: DUSAN TRIPKOVIC, et al.
Published: (2006-03-01)

Gas permeability of ice-templated, unidirectional porous ceramics
by: Jordi Seuba, et al.
Published: (2016-01-01)

Alternative Process Routes to Manufacture Porous Ceramics—Opportunities and Challenges
by: Uwe Scheithauer, et al.
Published: (2019-02-01)

Simple and Rapid Detection for Rice stripe virus Using RT-PCR and Porous Ceramic Cubes
by: Su-Bin Hong, et al.
Published: (2015-12-01)

Research progress in porous ceramics prepared by freeze casting
by: ZHANG Ying, et al.
Published: (2019-07-01)

Effect of silica sol addition on sintering properties of porous alumina ceramics
by: LIN Hong-yu, et al.
Published: (2021-05-01)

Numerical Study of Natural Convection in a Square Cavity Filled with a Porous Medium Saturated with Nanofluid
by: G. A. Sheikhzadeh, et al.
Published: (2013-07-01)

Comparison of Three Manufacturing Techniques for Sustainable Porous Clay Ceramics
by: Fernanda Andreola, et al.
Published: (2021-12-01)

Preparation of porous ceramic membranes from Sayong ball clay
by: Maisarah Mohamed Bazin, et al.
Published: (2019-10-01)

Influence of Porosity and Pore-Distributions on Strength Properties of Porous Ceramics
by: Miyazaki, Natsumi
Published: (2019)

Electrohydraulic Forming of Low Volume and Prototype Parts: Process Design and Practical Examples
by: Alexander V. Mamutov, et al.
Published: (2021-05-01)

PROPERTIES OF HIGHLY POROUS CORDIERITE CERAMIC OBTAINED BY DIRECT FOAMING AND GELCASTING METHOD
by: Ye Li, et al.
Published: (2016-05-01)

Vacuum Assisted Resin Transfer Molding (VARTM): Model Development and Verification
by: Song, Xiaolan
Published: (2014)

The effect of wall thickness distribution on mechanical reliability and strength in unidirectional porous ceramics
by: Jordi Seuba, et al.
Published: (2016-01-01)

Synthesis of highly porous Al2O3-YAG composite ceramics
by: Egelja Adela, et al.
Published: (2016-01-01)

Effect of thermal conductivity of ceramic compact on the porous structures of foamed bodies via direct-foaming method
by: Akihiro Shimamura, et al.
Published: (2020-01-01)

Effect of sintering temperature on structure and properties of highly porous glass-ceramics
by: Artem Iatsenko, et al.
Published: (2015-06-01)

Fabrication and characterization of nanostructured Ba-doped BiFeO3 porous ceramics
by: Mostafavi E., et al.
Published: (2016-03-01)

Porous Calcium Phosphate Ceramic Scaffolds with Tailored Pore Orientations and Mechanical Properties Using Lithography-Based Ceramic 3D Printing Technique
by: Jung-Bin Lee, et al.
Published: (2018-09-01)

Study of Compaction Properties and Permeability Prediction of Multilayered Quadriaxial Non-Crimp Fabric in Liquid Composite Molding Process
by: Yi Geng, et al.
Published: (2020-07-01)

Carbon Nanofibers Propped Hierarchical Porous SiOC Ceramics Toward Efficient Microwave Absorption
by: Yani Liu, et al.
Published: (2020-01-01)